Before we even get into the scaling issues that others noted, the first thing that Cole gets wrong in #2 is that he doesn't have a clue how the building was constructed, or if he does, then he is intentionally deceptive because not a single one of his experiments come close to replicating the actual building structure.
The collapse initiation was caused by the sagging floor trusses pulling the columns inwards, this is confirmed by photos and video of the exterior columns bowing inwards and then collapsing inwards at the moment of collapse.
You can model this pretty easily with a straw a table and your fingers. Hold the straw so it stand upright on the table and place a finger from your right hand on top of it, pushing downwards hard enough to hold it in place, but not to deform or bow it. Now, without increasing the pressure on the top of the straw, push the center of it sideways with your other finger and watch what happens.
This is what happen in the towers, when the first wall columns deformed to the point of collapsing, the weight of the upper tower transfers instantly to the remaining columns meaning that those almost compromised by their deformation had more load to hold, and this collapses as well, resulting in further weight shifting and more deformed columns collapsing.
Cole show instead a pressure pushing the walls outwards, this is just totally wrong.
Next, his first experiment concentrates on breaking the "floors", but this isn't the mechanism in the WTC collapses. In fact it was the connectors between the outer walls and the floor trusses that failed once collapse had begun, not the floors themselves.
Cole's first experiment totally fails here because 1) His connectors aren't to scale. 2) His floors aren't to scale. 3) His outer shell is rigid. 4) The connectors, which were the fail point in the WTC are solidly attached to the outer wall and can't fail.
Experiment #1 has no relevance to the WTC collapse
I could keep going, but in the end only one of his experiments came close to the WTC structure, the one with the plastic Pizza thingies on their side, where they were thrust out and the floors all collapsed pancake style, and even this one wasn't entirely correct because the floors in the WTC didn't have columns between them.
The WTC was like a tall thin hollow box made up of jigsaw puzzle pieces with a much thinner box of jigsaw puzzle pieces in its centre. To keep these two boxes stable, floors were hooked onto them to connect one to the other and to hold them together in position. Unlike conventional buildings, the WTC support columns were on the outside of the floors, rather than between them, as Cole places them in every one of his experiments.
Each of his experiments is invalid for this reason alone, even without the scaling issues.
On scaling.... To simulate the building in a scale model you need to scale the components strength to their size, which means changing the material. You also have to scale for mass because Momentum is important in the collapse, but volume and thus mass, scales at a different rate to linear dimensions. If I take a 1,000kg, 1m3 of water and half the linear dimensions, I end up with a 0.25m 0.125m3 of water with a mass of just 250kg 125kg.
This means that if we were to do a 50% scale of the WTC, we'd have to find a material 50% 25% weaker and twice four times as dense to replicate it.
Except this isn't true either because we need to have our impact scaled as well. Since Gravity is the same, if in the 1:1 version of our WTC each floor was falling 3m before hitting the next one, accelerating at about 10m/s2 between each floor, in our scale model each floor only accelerates for 1.5m between impacts so the delta-v is only 0.7071 that of the the same object falling from 3m. (I'll let you figure out why, but I'll give you a clue, it has to do with the formula for determining velocity by distance fallen and the square root of 1/2. Thus the Momentum is still 0.7071 of what it should be (P = mv). Thus to get the Impact Momentum at the right scale, we actually have to use a material 2.83x 5.66x as dense as our original, and this is just for a 50% scale model, it only gets worse as you get smaller! If we made the model 25% in size, we'd have to use materials 22.6 32 times as dense and 4 16 times as weak as that the WTC was constructed in, it's debatable that such a structure could even actually stand up without collapsing all by itself.
Cole didn't do any of this. His experiments were a fail.
Finally, he shows a video with firecrackers. This should raise red flags for anyone with a brain. You can clearly hear the crackers going off, and see the paper being exploded outwards. He then shifts to a bunch of firemen saying they heard pop, pop, pop, pop, but what doesn't he do? He doesn't show a video where those explosions are clearly heard as they are in his own model, and in every single CD video on the net. If explosives were used in the WTC, then just like in his video, and the thousands of CD videos, we'd be able to hear them! We be able to see the shock wave hit the camera as we do in CD videos. It wouldn't be a few fire fighters talking about pop, pop, pop, pop. There would be audio of the explosives going off, just as we heard the fire crackers.
The video is a total joke. He doesn't understand the collapse method, he doesn't understand the buildings construction, and he doesn't understand scale.
That is what he got wrong.