My perspective is that ROOSD describes the trade center tower collapses... Bays can have runaway collapse but it wouldn't necessarily bring the whole building down... Ronan Point shows this... Twin towers came totally down because there were no bayes and it was an OOS design... PLUS unlike 7WTC it had closely spaced face of columns which because of their staggered arrangement and tight spacing PEELED.. sort of pulling a whole bunch of columns in huge sheets. That will not likely happen in a bayed 30' spacing of columns facade. Peel was rather unique to the OOS design towers.
The only thing not terribly unique in the building was the core. but it had some odd things as well because the massive antenna had to have the load redistributed because the columns under it framed a shaft and were not very large... as the loads they carried for 110 floors were the smallest in the building (more or less)... so rather than beef up 109 floors of columns, using up real estate and costing money... the hat truss was added which also could move lateral (and if needed axial loads about).
The twin tower OOS system used 80" oc whimpy trusses which did not "match" to the core column positions... so a belt girder was cantilevered from the perimeter of the core and acted as a "transfer" structure... moving the 80" oc truss loads to the 25' OC or so core columns.
So the twins were no only lacking bays... but their OOS system drove other engineering decisions which seem to me led to the runaway collapse AND the form it took.
But yes the core floor collapse was within a bay system... although there was lots of shafts with no floors to collapse in the first place... such as most of the areas between rows 500 and 600 where the express cars ran.
Runaway floor collapse leaves columns unbraced and they will fall because of their too high slenderness ratio... doesn't have to be a "column" free space... but a bay IS a column free space... bounder by usually 4 columns!
The belt girder, and the panel columns of the facade were driven by the choice for a light weight slab spanning only 80"... with no girders of course.
The only thing not terribly unique in the building was the core. but it had some odd things as well because the massive antenna had to have the load redistributed because the columns under it framed a shaft and were not very large... as the loads they carried for 110 floors were the smallest in the building (more or less)... so rather than beef up 109 floors of columns, using up real estate and costing money... the hat truss was added which also could move lateral (and if needed axial loads about).
The twin tower OOS system used 80" oc whimpy trusses which did not "match" to the core column positions... so a belt girder was cantilevered from the perimeter of the core and acted as a "transfer" structure... moving the 80" oc truss loads to the 25' OC or so core columns.
So the twins were no only lacking bays... but their OOS system drove other engineering decisions which seem to me led to the runaway collapse AND the form it took.
But yes the core floor collapse was within a bay system... although there was lots of shafts with no floors to collapse in the first place... such as most of the areas between rows 500 and 600 where the express cars ran.
Runaway floor collapse leaves columns unbraced and they will fall because of their too high slenderness ratio... doesn't have to be a "column" free space... but a bay IS a column free space... bounder by usually 4 columns!
The belt girder, and the panel columns of the facade were driven by the choice for a light weight slab spanning only 80"... with no girders of course.