If it doesn't agree with experiment, it's wrong.

Status
Not open for further replies.
Which brings us to what Cole obviously is doing: he is claiming that the behavior of his various little towers should be the same as the behavior of the actual towers. That goes way beyond just making a claim about Newton's laws. A potato stuck in a sink obeys Newton's laws (approximately, relativistic, quantum, blah blah whatever), but it mysteriously does not behave the same way Cole's towers did. Same with a column of sand. In order to claim that the WTC towers should have behaved the same as the model towers, Cole has to be claiming that his models are good scale models of the towers in relevant ways. That is a claim about structures, modeling, and scaling, just like everyone in the thread has been saying from the beginning.

Newton's laws apply to the models and the real towers. But that doesn't mean that exactly the same things will happen in both cases.

QFT. That is exactly the point, and very clearly and simply stated. It's enlightening to see the dilemma it's put FalseFlag into. He's trying to steer some middle course between claiming that Cole's model is properly scaled, which obviously it isn't, and that Cole's model is a simple demonstration of physical laws, in which case it isn't predictive of the specific behaviour of the collapses.

And this takes us back to the OP, where FalseFlag is, perhaps quite deliberately, asking the wrong question. He challenged the forum, aside from some irrelevant conditions, to disprove the results of Cole's experiment. While Cole isn't actually performing an experiment, he's at least demonstrating certain aspects of Newton's laws, though in a very simplistic fashion; and it's an obviously impossible task to ask for disproof of the results of an experiment, because the observations are what they are. But the question he's tried all along to avoid even admitting the existence of, by throwing up as many smokescreens as he can, is: Are Cole's physical models representative of the actual behaviour of the WTC collapses? And of course he daren't let this question be asked, because the answer is so obviously no. And we've all let ourselves, to some extent, be sucked into his game, and some people have said some very silly things about Newton's laws as a result.

Time to stop playing. FalseFlag, here's a challenge to you, returning the burden of proof to where it should have been all along. Having accepted that Cole's videos demonstrate that Newton's laws are what they are, please provide compelling evidence that the behaviour of Cole's models is representative of the behaviour of the WTC towers while collapsing, to a sufficient precision to be predictive of the specific aspects of the collapse they are intended to predict. Until you've proven this point, there's really nothing here to talk about.

Dave
 
You are Moving the Goal Posts.

You had declared:

So I asked:
Can you quantify this "very large" energy required?

There are basically two theories on the table that would explain the source of that energy:
  • Gravity (GPE - Gravitational Potential Energy)
  • Explosives (ChE - Chemical Energy)
I quantified the requirement for the first theory - that GPE is the energy source: Drop height of 10 to 40 floors - easily available for collapses starting 78+ floors above ground.

Remember: You made a claim about the quantity of energy.

Now you:
How much explosives (equivalent to chemical energy, ChE) does it take, per mass unit of steel to propel a steel section to 60 mph?
That calculation is much less straightforward.
I have done it.
Have you?
Can you guess?

You are Moving the Goal Posts.

You had declared:

So I asked:
Can you quantify this "very large" energy required?

There are basically two theories on the table that would explain the source of that energy:
  • Gravity (GPE - Gravitational Potential Energy)
  • Explosives (ChE - Chemical Energy)
I quantified the requirement for the first theory - that GPE is the energy source: Drop height of 10 to 40 floors - easily available for collapses starting 78+ floors above ground.

Remember: You made a claim about the quantity of energy.

Now you:
How much explosives (equivalent to chemical energy, ChE) does it take, per mass unit of steel to propel a steel section to 60 mph?
That calculation is much less straightforward.
I have done it.
Have you?
Can you guess?

I'll try again, perhaps AClark sees this now.


You are Moving the Goal Posts.

You had declared:

So I asked:
Can you quantify this "very large" energy required?

There are basically two theories on the table that would explain the source of that energy:
  • Gravity (GPE - Gravitational Potential Energy)
  • Explosives (ChE - Chemical Energy)
I quantified the requirement for the first theory - that GPE is the energy source: Drop height of 10 to 40 floors - easily available for collapses starting 78+ floors above ground.

Remember: You made a claim about the quantity of energy.

Now you:
How much explosives (equivalent to chemical energy, ChE) does it take, per mass unit of steel to propel a steel section to 60 mph?
That calculation is much less straightforward.
I have done it.
Have you?
Can you guess?

I'll try again, perhaps AClark sees this now.

You are Moving the Goal Posts.

You had declared:

So I asked:
Can you quantify this "very large" energy required?

There are basically two theories on the table that would explain the source of that energy:
  • Gravity (GPE - Gravitational Potential Energy)
  • Explosives (ChE - Chemical Energy)
I quantified the requirement for the first theory - that GPE is the energy source: Drop height of 10 to 40 floors - easily available for collapses starting 78+ floors above ground.

Remember: You made a claim about the quantity of energy.

Now you:
How much explosives (equivalent to chemical energy, ChE) does it take, per mass unit of steel to propel a steel section to 60 mph?
That calculation is much less straightforward.
I have done it.
Have you?
Can you guess?

I'll try again, perhaps AClark sees this now.

You are Moving the Goal Posts.

You had declared:

So I asked:
Can you quantify this "very large" energy required?

There are basically two theories on the table that would explain the source of that energy:
  • Gravity (GPE - Gravitational Potential Energy)
  • Explosives (ChE - Chemical Energy)
I quantified the requirement for the first theory - that GPE is the energy source: Drop height of 10 to 40 floors - easily available for collapses starting 78+ floors above ground.

Remember: You made a claim about the quantity of energy.

Now you:
How much explosives (equivalent to chemical energy, ChE) does it take, per mass unit of steel to propel a steel section to 60 mph?
That calculation is much less straightforward.
I have done it.
Have you?
Can you guess?

I'll try again, perhaps AClark sees this now.

You are Moving the Goal Posts.

You had declared:

So I asked:
Can you quantify this "very large" energy required?

There are basically two theories on the table that would explain the source of that energy:
  • Gravity (GPE - Gravitational Potential Energy)
  • Explosives (ChE - Chemical Energy)
I quantified the requirement for the first theory - that GPE is the energy source: Drop height of 10 to 40 floors - easily available for collapses starting 78+ floors above ground.

Remember: You made a claim about the quantity of energy.

Now you:
How much explosives (equivalent to chemical energy, ChE) does it take, per mass unit of steel to propel a steel section to 60 mph?
That calculation is much less straightforward.
I have done it.
Have you?
Can you guess?

I'll try again, perhaps AClark sees this now.

You are Moving the Goal Posts.

You had declared:

So I asked:
Can you quantify this "very large" energy required?

There are basically two theories on the table that would explain the source of that energy:
  • Gravity (GPE - Gravitational Potential Energy)
  • Explosives (ChE - Chemical Energy)
I quantified the requirement for the first theory - that GPE is the energy source: Drop height of 10 to 40 floors - easily available for collapses starting 78+ floors above ground.

Remember: You made a claim about the quantity of energy.

Now you:
How much explosives (equivalent to chemical energy, ChE) does it take, per mass unit of steel to propel a steel section to 60 mph?
That calculation is much less straightforward.
I have done it.
Have you?
Can you guess?

It's amazing AClark finds time to post in this thread and others yet continually ignores these replies.
 
Where something is posted does not necessarily affect its credibility. You are beating a dead horse with this argument.

I agree, but cannot say why because one of the forum rules does not allow certain types of comments re: forum members so I am not able to express myself fully and correctly.
 
Bingo, give that man a teddy bear. That's the whole point. The amount of energy required to eject steel sections a considerable distance is very large ...

AClark, absolutely not.

The external column assemblies that ended up furthest from the towers (e.g., the ones that impacted the World Financial Center & Winter Gardens) took virtually no energy whatsoever to end up 400-600 ft away from the towers.

As I'm sure you've discussed with Oystein, the equation for the amount of work for moving any mass is

W = F x d = F d cos(Ω)
(where
W = work, (scalar)
F = a force (vector),
F = the magnitude of F, (scalar)
d = displacement (vector)
d = the magnitude of d, (scalar)

For any toppling structure (e.g., a ladder, the peeling away side of the towers) that is pivoting about some low point, F is the force that the lower structure applies to the upper, which acts along the line of the structure, and d is the motion of the upper portion of the structure, which is always 90° to the force throughout the fall. Therefore Ω = 90° throughout the fall, which means that cos(Ω) is always 0 throughout the fall & it takes no work, once it begins to fall.

The only work required to get those multi-ton beams all the way over to those other buildings was the work to sever their connections to other components, and to ever-so-slightly tilt them outwards.

I haven't followed your discussions, but I assume (bet?) that Oystein mentioned that the toppling sheets were visible emerging thru the could of debris during the fall...
 
Last edited:
Two questions:

Why is it everyone else's burden to prove FalseFlag wrong in his ignorant and baseless statements?
Why are so many of you letting him get away with it?

If you say I'm wrong then you have the burden of proof explaining why I'm wrong. If you are too lazy to do this then you should just say that you disagree.
 
If you say I'm wrong then you have the burden of proof explaining why I'm wrong. If you are too lazy to do this then you should just say that you disagree.
Funny. You are the one making the claim and you expect everyone to prove you wrong. Obviously you are are a troll or someone that doesn't understand a reverse burden of proof. Personally, I don't care what you say.
 
Client: "I came in here for an argument!"
Clerk: "Oh! Oh, I'm sorry, this is Abuse!"

:D
Absolutely wonderful. My favourite part:

- ...an argument is a collective series of statements to establish a definite proposition.
- No it isn't.
- Yes it is! It isn't just contradiction.
- Look, if I argue with you I must take up a contrary position.
- But it isn't just saying, 'No it isn't'.
- Yes it is.
- No it isn't!
 
I don't understand what's the matter with some of these people who refuse to listen to reason and learn some basic engineering and physics concepts. They are impenetrable, inflexible and unreasonable.
 
If you say I'm wrong then you have the burden of proof explaining why I'm wrong. If you are too lazy to do this then you should just say that you disagree.

You have gotten many things backwards in this thread. This is but one example.

You make a claim, you need to support it if you expect to have it accepted. You made a claim about the initial fall of the upper section of WTC 1. You based your claim on a video of the collapse. Your claim; your burden to back it with evidence.

(Well, actually, you based your claim on comments made by Cole, comments that were either taken out of context by you, misinterpreted by you, or just flat out wrong to begin with.)

Rather than supporting your claim with credible evidence, instead you exposed your ignorance of video technologies, their impact on data gathering from video images, what video technologies would have been available in 2001, what raw data was collected, how it was collected, the meaning of "constant" versus the meaning of "average"...the list goes on.


You claimed the upper section of the WTC 1 tower fell with constant acceleration. You have yet to support this claim with credible evidence.
 
Last edited:
Two questions:

Why is it everyone else's burden to prove FalseFlag wrong in his ignorant and baseless statements?
Why are so many of you letting him get away with it?

Don't want to get suspended or banned which we almost certainly would if we wrote the whole truth fairly and accurately. I have noted this problem with the assumption that it is not possible to identify trolls with assurance that is the only real problem I see here.

ETA: Note that by this I am not referring to any individual here who may or may not be a troll. But I know them when I read them.
 
Last edited:
Bleeding nonsense "None of the satellites of the solar system (M, V, E, M, J, U, N, [P]) have rings THEREFORE Saturn cannot have rings."

Just as an aside.... All of the Gas Giants, including Jupiter, Uranus, and Neptune, have rings.

Also Earth did have a ring after the collsion that created our moon, in fact the moon is our ring all brought together in into a big ball.

Also... Interesting fact, the Sun also has rings....
 
If you say I'm wrong then you have the burden of proof explaining why I'm wrong. If you are too lazy to do this then you should just say that you disagree.

Wrong.

You're the twoofer trying to convince the world you need a "new" investigation.

So far (almost 15 years now) you and others of your ilk are failing badly.

I'd tell you to do better, but I know you can't.
 
No. Asking me meaningless questions is the only way you can attempt to remain relevant in this discussion.


I gave my answer. You just ignored it. It's there. Go look. It's there.

No, he does not ignore scale. Scale does not matter, and he addresses the issue near the beginning of his video.

You just won't learn. Stop asking me meaningless questions.

The cry of the incompetent student, who will claim a question is "meaningless" because answering it correctly will require unlearning what they think they know, and aligning their understanding with reality.

You really could learn this, if you wanted to, instead of clinging to the mistakes you have adopted (and being dishonest about what others are posting...).

You really could.
 
You should look up the meaning of "dodge" before you post it so many times. Also look up "delusions", "denial", and "cognitive dissonance" while you're at it. Once you understand those terms completely and need to find a real-world example, look in the mirror.

Which does not explain your tendency to resorting to attempting the Verónica Grande. Poorly and transparently.
 
Funny. You are the one making the claim and you expect everyone to prove you wrong. Obviously you are are a troll or someone that doesn't understand a reverse burden of proof. Personally, I don't care what you say.

If I make a claim and provide proof, I expect someone to provide proof I am wrong if they make the claim I am wrong.

Here is an example, in the absolute simplest way it can be done. I have intentionally chosen to use the third person, to make this as clear as possible.

FalseFlag: The earth rotates about its axis. Source: http://www.polaris.iastate.edu/NorthStar/Unit3/unit3_sub1.htm

Skeptic: Wrong.

FalseFlag: Don't say I'm wrong without providing proof I am wrong. Please provide an example, other than your own words, proving I'm wrong. Please use a credible source, as I have done.

Since FalseFlag is not wrong, and skeptics can not allow ANY of his points to be considered valid, here is what happens next.

Skeptic: Define rotate. Define axis. Does the axis change? Does the rotation speed change? What makes it spin? What about the poles? What about the magnetic poles? What about quicksand? What about the moon and dark gravity? What about electromagnetism? What happens when you increase the mass of the earth? What happens when Superman flies fast enough in the opposite direction of rotation? If he could save Lois Lane, why couldn't he stop the JFK assassination? And this absurdity goes on, and on, and on, and on (and on).

Think about this. What does it say about the skeptic who refuses to accept any point FalseFlag makes? What does it say about the skeptic who refuses to accept as true even the most basic points, if FalseFlag is the one saying it? What does it say about the skeptic who even tries to argue against basic science, just to try to discredit FalseFlag? Well, its says quite a bit. I just hope the other truthers and truthers-to-be can see through all the skeptics' BS and through all their really lame and childish tactics.
 
Last edited:
No sir, you've answered much less than that, and what you have answered has been mostly with games and double-talk.

Please use a credible source to define "double-talk", and give one example where I have done this.

You've ignored posts by me and by others, and you've ignored important points in posts while only responding to the ones you thought you could win a debate point with.

This is nothing more than your opinion. I have attempted to answer every legitimate question or argument at least once. Your refusal to accept my responses is not proof I am ignoring posts.

Cole's models are similar to the WTC towers in only one trivial way: They're a set of horizontal planes separated by some type of vertical support. Yep, you can also say that the direction of gravity is the same for both (although you never got around to explaining why you think that's an issue), and certainly the laws of physics are the same for both

Wow. So far two different skeptics have inadvertently proven my points. You don't get to retract this. You can weasel out of it any way you want, but it's here, forever. You are right, the laws of physics are the same for Cole's models and the WTC buildings; therefore, if the only way he can duplicate the observed motion of the WTC1 and WTC2 collapses is to remove floors before the upper mass reaches the lower floors, then the only reasonable conclusion is that the lower floors were removed by something other than the upper mass.

Game. Set. Match. Thanks for winning the game for me.

You've also ignored that Verinage demolition, Ronan Point and Skyline towers are real-world "experiments" that prove Cole's conclusions are wrong. Why are you still asking what he got wrong?

My claim: This argument is beyond absurd, and I keep repeating this.

Proof 1: Verinage is done to low-rise concrete buildings. A low rise concrete building is not a steel-framed high rise. Source: https://www.youtube.com/watch?v=NiHeCjZlkr8

Proof 2: Deceleration is observed in a verinage collapse. Source: https://www.youtube.com/watch?v=NiHeCjZlkr8

Proof 3: Ronan Point was not a steel-frame high rise. Ronan Point had no external support structure. The portion of the structure that collapsed did so due to sudden-impact loading. There is no evidence the collapse occurred at freefall. Source: http://engagedscholarship.csuohio.edu/cgi/viewcontent.cgi?article=1021&context=encee_facpub

Proof: Skyline Towers was also not a steel-frame high rise. Here is a direct quote from the investigation:
Upon completetion of the analysis, it was determined that moments in the column strips of the slab were not great enough to cause failure. On the other hand, the analysis did show that for case I and III column #67, 68, 83, and 84 all experienced shear stress greater than the shear capacity of the concrete slab. This indicates that the partial or complete removal of forms was a major contributing factor to the collapse. The analysis of case II shows that the shear stress in the slab did not exceed the design capacity. This result confirms that the strength of the 23rd floor slab was below the design strength of 3000 psi at the time of the collapse. (Leyendecker 1977)

This type of failure is highly undesirable because it usually strikes without much warning. It also very easily can lead to progressive failure which is defined by the Portland Cement Association as "the local failure of a primary structural component leading to collapse of adjoining members which in turn leads to additional collapse."(Polak 2005) In the case of Skyline Plaza, the failure of the local columns on the 23rd floor due to punching shear initiated the failure of floor slabs below it and eventually created a total failure much greater than the original failure.

There is no evidence anywhere that claims the Skyline Tower collapse occurred at freefall. Additionally, the entire building did not collapse.

Sources: https://failures.wikispaces.com/Bailey's+Crossroads+-+Skyline+Plaza
http://engagedscholarship.csuohio.edu/cgi/viewcontent.cgi?article=1024&context=encee_facpub

The only reason I am using wikispaces as a source is because I can't copy and paste from the more reliable source. They say approximately the same thing, so it doesn't matter.
 
Last edited:
Status
Not open for further replies.

ISF - Join now!

Every member here is approved by hand. No bots, no spam, just people who care about evidence and honest debate.

Membership is free!

Create your free account

Back
Top Bottom