If it doesn't agree with experiment, it's wrong.

Status
Not open for further replies.
Ah so in your world it is different!

Lets see, if it all impacted at roughly the same time the energy input would be pretty much the same but if I dropped 1% of it at a time (spaced by any time interval you'd like) then each individual impact would be less but the net energy after all impacts were accumulated would be the same.

Now, can you relate that to the failure of the WTC towers?

Would it all impact at the same time? Stop trying to wrap your head around fictions, what would actually happen? Lets say (to be kind) in an 11mph Northerly wind. You can add in the thermals or not, your choice.
 
No confusion here, ...?
Not true, you think terrorists are alive, you can't figure out which planes were used...
You think dust is mass-less, you think a BS video redeems the massive ignorance of 911 truth claims.

You can't define BS you make up.
Define...
great speed.
Please define in feet per second, or meters per second, be exact please.

Why can't you define "great speed"? Failed to do the work?


oops, time for dinner, mummy is calling, time for a chip butty
 
Last edited:
No confusion here, perhaps you think eject and toppling are the same?

We have a building which is 1300 feet high, standing 300 feet from another building, which is 600 feet tall. The impact was around 1200 feet, so we have 1200 feet of outer columns falling outwards in an arc during the collapse. So yes, it was the peeling of the outer columns that hit WTC7. Unless you think they used missiles to shoot the columns outward.
 
Last edited:
Was it Bazant who did his measurements with a large TV screen and a ruler :)

Yep, which was quite adequate for the approximate average acceleration he was looking for, but he wasn't trying to detect jolts. Presumably, Chandlers method with the software gives a better approximation of the average, but then Chandler draws a line through his plots and commits the logic error of assuming his own straight line means "uniform" acceleration and declares there weren't any jolts.
 
Would it all impact at the same time? Stop trying to wrap your head around fictions, what would actually happen? Lets say (to be kind) in an 11mph Northerly wind. You can add in the thermals or not, your choice.
What fictions?

Is it fictitious that the collapse of the towers was inclusive of not one mass falling onto another but instead an accumulation of many impacts happening rapidly over time and that the effect of those impacts was governed by not only the laws of physics but also the materials mechanical characteristics?

5kg is 5kg.
 
Would it all impact at the same time? Stop trying to wrap your head around fictions, what would actually happen? Lets say (to be kind) in an 11mph Northerly wind. You can add in the thermals or not, your choice.

Oh and btw, in your example what type of glass was it?

How thick was it?

Was it tempered?

What was the chemical composition of the glass?
 
No confusion here, perhaps you think eject and toppling are the same?
The question really is, was the energy released from the collapsing building sufficient to cause the effect (think collisions or possibly a spring type effect by steel that had twisted/compressed/bent but not experienced irreversible deformation) and if not why would any cd include such as useless expenditure of energy?
 
Avoiding the subject by trying to raise another example. The partial collapse of RP was not like WTC, and it's a stretch for you to try and claim it was, just because gravity played a part in both.

Fling out as many personal opinions as you like, but both are well-documented and relatively well-understood examples of the same phenomenon, vertical progressive collapses, and both would be equally impossible if Cole's imaginary interpretation of Newton's Third Law were valid. Your uninformed opinion to the contrary is of no value.

By the way, let me suggest an experiment to you. Take a piece of dry spaghetti, hold it vertically upright on a flat surface by placing a finger on the top, then press down with your finger until it snaps. Now tell me how much explosive was needed to make part of it fly out sideways.

Dave
 
Bingo, give that man a teddy bear. That's the whole point. The amount of energy required to eject steel sections a considerable distance is very large...

Can you quantify this "very large" energy required?

There are basically two theories on the table that would explain the source of that energy:
  • Gravity (GPE - Gravitational Potential Energy)
  • Explosives (ChE - Chemical Energy)

The GPE theory usually has the form that very tall sections of wall (up to perhaps 500 feet tall - ca. 40 stories) simply toppled over, such that the top panels ended up ca. 500 feet away.
Without quantifying this, it should be obvious that this much GPE was in fact available - the towers were considerably more than 500 feet tall.

Truthers claim (falsely - but let's accept the claim for fun and argument's sake) that heavy, multi-ton steel sections were ejected at lateral velocities in the vicinity of 60 mph = 27 m/s.

The kinetic energy of such a piece is
KE = 1/2 m * v2 = m * 364.5 m2/s2​

To convert potential energy...
GPE = m * g* h = m * 9.805 m/s2 * h​
to that KE, you need a drop height of
h = GPE / m / 9.805 m/s2​

With GPE = KE, we get
h = m * 364.5 m2/s2 / m / 9.805 m/s2 = 37.17 m = 121.9 ft​
That's about 10 stories - regardless of the mass of the object thus laterally propelled.

So any steel section, regardless of its mass, would need to drop only a bit over 10 floors to convert enough GPE to KE to get to 60 mph.


How much explosives does it take, per mass unit of steel[*], to propel a steel section to 60 mph?
That calculation is much less straightforward.
I have done it.
Have you?
Can you guess?


[*] Note: for the conversion of GPE to KE, only height differential is needed - same h for any amount of mass
For the conversion of the explosives' chemical energy ChE to KE, the amount of explosives is proportional to the mass you want to accelerate.
 
Last edited:
Can you quantify this "very large" energy required?

There are basically two theories on the table that would explain the source of that energy:
  • Gravity (GPE - Gravitational Potential Energy)
  • Explosives (ChE - Chemical Energy)
<snip>

That's all very well and mathy, but it makes some very glaring omissions. Primarily the trigonometry of the situation. If you are going to have pieces toppling, then you are going to need pivot points, and enough geometry for your javelin.
 
That's all very well and mathy, but it makes some very glaring omissions. Primarily the trigonometry of the situation. If you are going to have pieces toppling, then you are going to need pivot points, and enough geometry for your javelin.
This is the best you got, more BS claims...
How much explosives would it take in your super world of trig and the math you can't do anyway. You played the "trig" card, but can't back it up with a reason.

You can't define the things you post.
Define...
great speed.
Did you check to see if it was possible for a gravity collapse to eject the steel at a speed you can't define?
How will you know? Take physics off the ignore list.

You can't do the calculation because? This is... :popcorn1
 
Last edited:
That's all very well and mathy, but it makes some very glaring omissions. Primarily the trigonometry of the situation. If you are going to have pieces toppling, then you are going to need pivot points, and enough geometry for your javelin.

Well how about the pivot point being on the first floor? Or don't you understand how peeling a banana works?

Put a book on its side and push it over. Where is the pivot point?
 
Last edited:
Well how about the pivot point being on the first floor? Or don't you understand how peeling a banana works?

Put a book on its side and push it over. Where is the pivot point?

You can back that up with the evidence of course?

You can't just make this stuff up you know ;)
 
Status
Not open for further replies.

ISF - Join now!

Every member here is approved by hand. No bots, no spam, just people who care about evidence and honest debate.

Membership is free!

Create your free account

Back
Top Bottom