Are 4 to 4.5 hour office fire simulations valid?

If drywall panels had to be removed to access the bare columns, then what's wrong with that being done during the heavy renovations of 1998/1999?

The top 60 stories in WTC 1 and 2, along with 8 stories in WTC were "heavily renovated" in 1998/1998?

Do you have proof of this? Who did this work?
 
If drywall panels had to be removed to access the bare columns, then what's wrong with that being done during the heavy renovations of 1998/1999?

Because cutter charges have a significant thickness. You can't have short sections of drywall sticking out with charges underneath, as it would look stupid and people would be asking questions, and loudly. You'd have to re-clad the whole height of it.

And where the column was at the end of the central elevator block you'd have to extend *all* the drywall outwards for the entire length and width of the block to avoid the same problem. It's a ludicrous idea.

Then you'd need to demonstrate that these 'renovations' covered the entirety of the floors supposedly blown-up.

Does it ever occur to you that you're so devoted to believing this CT guff that you'll grasp at absolutely anything - however absurd - to defend your belief?
 
I was referring to WTC 7, but there was a heavy fireproofing renovation in 1999-2000 for the Twin Towers on the top floors: http://911blogger.com/node/13272

So? What is the point? The fire proofing was knocked off by the 1300 and 2000 pounds of TNT kinetic energy impacts...

So?> Your inside job remains a fantasy; 15 years of failure. You remain 8 years behind, and clueless on what happened on 9/11, and how the tower collapsed due to fire.
 
Last edited:
That too. CTists have watched too many 'Mission Impossible' variants where experts nip in and do months of work in 30 minutes. Szamboti's demolition crew being a prime example.

Even more basically, there was NO evidence pre-weakening was done, so it is a call to magic.

ETA: And it is a red herring in the thread.
 
Last edited:
I was referring to WTC 7, but there was a heavy fireproofing renovation in 1999-2000 for the Twin Towers on the top floors: http://911blogger.com/node/13272

And you have no evidence this noise abatement was installed, so it is a call to magic, and also it has nothing to do with this thread.

Masterful derail you've got going, good luck with stretching it out and keeping the hope alive, especially when the demolitions theory really has no hope.
 
I was referring to WTC 7, but there was a heavy fireproofing renovation in 1999-2000 for the Twin Towers on the top floors: http://911blogger.com/node/13272
Read this again:
Well, now show that it was actually used and you might have something.

You are trying "A exists, B exists, therefore A was caused by B" (where A = absence of noise; B = technology for noise suppression). That's ridiculously flawed logic. I'm sure you can realize that.
Then provide proof that such foam was actually used. Show us some foam with explosive residue, or some WTC steel cut with cutter charges, or some detonation cord, or some triggering device... Anything that actually proves it was used. There's plenty of photographic material that has been analyzed by tons of truthers. The best they could come up with so far is to claim that this is the result of thermite cutting:

http://americanbuilt.us/images/911/evidence-of-thermite.jpg

when it's obviously the result of cutting torches.

I'm sure you can do better. Go ahead.
 
Devices placed on the perimeter, who knows? I already gave photographic evidence for the perimeter being dismembered artificially. Someone asked for evidence of explosive destruction, I gave it, and they moved the goalpost with their coked out "silent explosives" meme. Imagine if this wasn't the World Trade Center, this was john's skyscraper down the street that burned down, no casualties or political pressure; Mr. Arson Investigator watches a video and sees how the perimeter of the building appears to be dismembering in mid-air after a flash of light and puff of smoke. What is that observation consistent with?

Riddle me this: if bright flashes are explosives AND the sound of explosives is dampened by foam and sheet metal, then how in the hell do we see bright flashes AND not hear them?


foam? foam?! FOAM?! FOAM?! WHERE WERE THE 50 TON HYDRAULIC PRESSES MAN.
What about THE (afaik only one is ever mentioned) 50 ton press?
Its a chunk of metal weighing in at about 500 pounds. What about it?


ETA: perhaps I am on ignore to MJ
 
Last edited:
Riddle me this: if bright flashes are explosives AND the sound of explosives is dampened by foam and sheet metal, then how in the hell do we see bright flashes AND not hear them?



What about THE (afaik only one is ever mentioned) 50 ton press?
Its a chunk of metal weighing in at about 500 pounds. What about it?


ETA: perhaps I am on ignore to MJ

Micah? Answer please.
 
I was referring to WTC 7, but there was a heavy fireproofing renovation in 1999-2000 for the Twin Towers on the top floors: http://911blogger.com/node/13272


Didn't you stop to think about security personnel, building inspectors, and janitorial employees, not to mention the thousands of workers inside those buildings, who would have noticed the thousands of feet of detonation wires and explosive hardware and required equipment needed to demolish steel frame buildings with explosives?

Now, think about all of the waste material created during the preparation process.
 
Last edited:
Last edited:
Here MichJava, this is what a 50 ton press looks like before it gets crushed by a million tons of office building materials.
http://www.powerstationusa.com/brands/AmerEquip/product.php?mod=AE50TM
Here's instructions on its use.https://www.youtube.com/watch?v=wFis4Pr5Lw8


On a similar note, I own a 10 ton, and a 20 ton, hydraulic bottle jack. I can easily lift them. Could, if I had reason to, lift one with each hand, off the bench. Might be hard pressed to do arm curls with them though.
You're making it look like a 50 ton press does not actually weigh 50 tons. Every truther knows that you're lying. :rolleyes:
 
You're making it look like a 50 ton press does not actually weigh 50 tons. Every truther knows that you're lying. :rolleyes:
Ya think?

You understand that a 50 ton press does not weigh 50 tons right?
BTW you did not answer the question, you do know what a 50 ton press is and that you could put one in your garage. I suppose I should also ask how you know for certain that no one found a badly damaged 50 ton press that you claim was in WTC7? (or was it in WTC1 or 2?)

To which Mich Java replied
What is so difficult about these questions?
Do you know that a 50 ton press does not actually weigh 50 tons? Easy question..........
Yes there was a press in one of the WTC building's basement levels. Do you know which one? Easy question.....
You brought it up and seemed to be implying that said press was pulverized and never found. Is that or is that not what you were saying? Easy question.....

Then
foam? foam?! FOAM?! FOAM?! WHERE WERE THE 50 TON HYDRAULIC PRESSES MAN.

I must be on MichJava's ignore list. (along with Beachnut who also mentioned that a 50 ton hydraulic press does not weigh 50 tons.)

If I am not on ignore then this is:
- obvious trolling or
- sheer stupidity or
- something else(don't want to set up any false dichotomy;) )
 
Last edited:
Riddle me this: if bright flashes are explosives AND the sound of explosives is dampened by foam and sheet metal, then how in the hell do we see bright flashes AND not hear them?



What about THE (afaik only one is ever mentioned) 50 ton press?
Its a chunk of metal weighing in at about 500 pounds. What about it?


ETA: perhaps I am on ignore to MJ

Micah? Answer please.

testing testing,,,, is this thing on ,,, IS THIS THING ON?
 
I note that there would have been several types of items that could have survived relatively intact through the collapses, whereas a hydraulic press in a machine shop is NOT one of those things. Air conditioning condenser cores, elevator motors, large transformer coils/cores. I do not find it at all odd that there are no references to finding such items in the rubble. It's just NOT important in the least to warrant mention.
 
testing testing,,,, is this thing on ,,, IS THIS THING ON?

Let me see if we can get a response ...

How much does a 50-ton press weigh?


(I once had a 5-ton jack in the back of my car, back in the day. Dunno how that car managed to scrape along :D)
 

ISF - Join now!

Every member here is approved by hand. No bots, no spam, just people who care about evidence and honest debate.

Membership is free!

Create your free account

Back
Top Bottom