Kinetic energy at atmospheric reentry from lunar mission

wogoga, even this dumb butt high school graduate can at least broadly grasp the way the Apollo reentry thermal protection system worked.

Bad math, bad physics, and poor research can and will make anyone look silly, no matter how many BS equations they post.
 
Last edited:
Wow, I have looked at this thread fromtime to time but being flummoxed by the personal number notation of woogaga I tended to just blow by it. ;only today did: fnally get it. His notation that is.

Utterly stupid to invent a new notation that adds nothing to the well established and easily understood common existing notation.
 
Wow, I have looked at this thread fromtime to time but being flummoxed by the personal number notation of woogaga I tended to just blow by it. ;only today did: fnally get it. His notation that is.

Utterly stupid to invent a new notation that adds nothing to the well established and easily understood common existing notation.

I think he created it to camouflage his nonsense.
 
I think he created it to camouflage his nonsense.

On his website he said he created it in part to undo the "pollution" the Americans caused in notation. I assume he's referring chiefly to the reversed usage of commas and decimal points. So because of the confusion this has allegedly caused, Wogoga is the unsung genius who has devised an entirely new number system that is impervious to the confusion he blames America for.

Also he appears to consider himself the unsung genius who has exposed the hoax behind America's greatest engineering achievement.

So yeah, a four-alarm delusion of grandeur.
 
The problem is that the figure ... snip...or do I miss something?
The real problem is that you missed that an ignorant conspiracy theory web site is lying, wogoga.

It is a lie that Figure 4.1.7-25 of Returning from Space: Re-entry (PDF) has any entry speeds :eye-poppi!
It is a lie that anything in that section of the document "implies an entry speed of only 2100 m/s". Figure 4.1.7-24 explicitly has the Space Shuttle with a speed of 7300 m/s at 80 km.
It is mispleading to cite a document that mentions the successful Apollo missions in a thread about the crazy idea that the Apollo missions could not happen.

A post made up of ignorance does not make the reentry of Apollo modules impossible :jaw-dropp!
 
Last edited:
On his website he said he created it in part to undo the "pollution" the Americans caused in notation. I assume he's referring chiefly to the reversed usage of commas and decimal points. So because of the confusion this has allegedly caused, Wogoga is the unsung genius who has devised an entirely new number system that is impervious to the confusion he blames America for.

Also he appears to consider himself the unsung genius who has exposed the hoax behind America's greatest engineering achievement.

So yeah, a four-alarm delusion of grandeur.

I suspect that he has somewhere seen a notation system that has been used in electronics ever since I first started playing with it back in the eighties
His usage is not standard however

I have seen the use of the multiplier as a replacement for a decimal point in electronics numbers, it's original usage was to make photocopied circuits less prone to errors by missing or added decimal points so as an example instead of writing 4.7megaohms, you would write 4M7

It was actually quite good in that respect as I often made photocopies of circuits that had almost unreadable numbers on

http://www.allaboutcircuits.com/textbook/direct-current/chpt-4/metric-notation/

So even his numerical notation is pinched but used incorrectly lol
 
Last edited:
170 gram = 9n17 kg
200 kg = 2p2 kg
333 m/s2 = 2p333 m/s per sec
I'm only on page 2 of this thread, but can anyone say where this oddball notation comes from? I mean, I can suss it out, sort of, but it's something I've never seen before and it only distracts from the discussion.

ETA: Oh, FFS. Never mind.

Fred
 
Last edited:
I suspect that he has somewhere seen a notation system that has been used in electronics ever since I first started playing with it back in the eighties
His usage is not standard however

I have seen the use of the multiplier as a replacement for a decimal point in electronics numbers, it's original usage was to make photocopied circuits less prone to errors by missing or added decimal points so as an example instead of writing 4.7megaohms, you would write 4M7

It was actually quite good in that respect as I often made photocopies of circuits that had almost unreadable numbers on

http://www.allaboutcircuits.com/textbook/direct-current/chpt-4/metric-notation/

So even his numerical notation is pinched but used incorrectly lol

That particular notation is only used in electronics and is possible partially because only two sig digits need be expressed in most ccts.

wogoga made his up solely because he is a rabid anti-American. Just what we needed political math.:boggled::rolleyes:

BTW, the superscript method of exponents was invented by Rene Decartes, most definitely not an American.
 
Last edited:
I have seen the use of the multiplier as a replacement for a decimal point in electronics numbers, it's original usage was to make photocopied circuits less prone to errors by missing or added decimal points so as an example instead of writing 4.7megaohms, you would write 4M7

Yes, but that's not what he's doing. What he's actually doing is starting from a number - say, 333ms-2 - then converting it to scientific notation - 3.33x102. He's then replacing the 102 part with a number-letter combination, where the number is the modulus of the power of ten and the letter p or n to represent its sign, placing this before the 3.33, and dropping the decimal point by assuming that the first digit precedes it. Thus 333 becomes 2p333, 200 becomes 2p2, and 170g becomes 0.17kG becomes 1n17. The ease of use of the system can best be assessed by the fact that wogoga himself screwed it up and rendered that last one as 9n17.

As for where it comes from, ask wogoga's proctologist.

Dave
 
That particular notation is only used in electronics and is possible partially because only two sig digits need be expressed in most ccts.

wogoga made his up solely because he is a rabid anti-American. Just what we needed political math.:boggled::rolleyes:

BTW, the superscript method of exponents was invented by Rene Decartes, most definitely not an American.

I've seen something conceptually similar to wogoga's notation used for values printed on capacitors. It's used for indicating numerical values ranging from 1 full Farad to nano and picofarads, which, as you say, only need a couple of digits of significance.
 
Wow, I have looked at this thread fromtime to time but being flummoxed by the personal number notation of woogaga I tended to just blow by it. ;only today did: fnally get it. His notation that is.

Utterly stupid to invent a new notation that adds nothing to the well established and easily understood common existing notation.

Me too!

Now sing it with me


"I got an H ...

to the P ....

To the power of GTO!..."
 
Yes, but that's not what he's doing. What he's actually doing is starting from a number say, 333 m s-2 – then converting it to scientific notation – 3.33x102. He's then replacing the 102 part with a number-letter combination, where the number is the modulus of the power of ten and the letter p or n to represent its sign, placing this before the 3.33, and dropping the decimal point by assuming that the first digit precedes it. Thus 333 becomes 2p333, 200 becomes 2p2, and 170 g becomes 0.17 kg becomes 1n17. The ease of use of the system can best be assessed by the fact that wogoga himself screwed it up and rendered that last one as 9n17.


Why not invest a few minutes: A simplified and less confusing notation for numbers

The purpose of this number notation:

  • transparency of order of magnitude in calculations
  • ease of writing
Fundamental principle of notation:

0p = 00p = 000p = 0000p = … = 100 = 1
0n = 90n = 990n = 9990n = … = 10-10 = 100 pico
00n = 900n = 9900n = 99900n = … = 10-100​

The sequence from kilo to milli (always division by 10): three.po, two.po, one.po, zero.po, nine.ne, eight.ne, seven.ne

A few examples:

00p375 ∙ 00p2 = 00p75
03p375 ∙ 06p2 = 09p75
23p375 ∙ 16p2 = 39p75
99n375 ∙ 06p2 = 05p75
99n375 ∙ 00p2 = 99n75
99n375 ∙ 99n2 = 98n75
83n375 ∙ 17p2 = 00p75
83n375 ∙ 16p2 = 99n75
83n375 ∙ 90n2 = 73n75
​

Cheers, Wolfgang
The Apollo Space Program – A gigantic conspiracy?
 
Why not invest a few minutes: A simplified and less confusing notation for numbers

The purpose of this number notation:

  • transparency of order of magnitude in calculations
  • ease of writing
Fundamental principle of notation:

0p = 00p = 000p = 0000p = … = 100 = 1
0n = 90n = 990n = 9990n = … = 10-10 = 100 pico
00n = 900n = 9900n = 99900n = … = 10-100​

The sequence from kilo to milli (always division by 10): three.po, two.po, one.po, zero.po, nine.ne, eight.ne, seven.ne

A few examples:

00p375 ∙ 00p2 = 00p75
03p375 ∙ 06p2 = 09p75
23p375 ∙ 16p2 = 39p75
99n375 ∙ 06p2 = 05p75
99n375 ∙ 00p2 = 99n75
99n375 ∙ 99n2 = 98n75
83n375 ∙ 17p2 = 00p75
83n375 ∙ 16p2 = 99n75
83n375 ∙ 90n2 = 73n75
​

Cheers, Wolfgang
The Apollo Space Program – A gigantic conspiracy?

Why? Because your "simplified and less confusing notation" is so bad that even you fail to use it correctly yourself as we can see from the corrections we have had to make to your "calculations" in this very thread.
 
Why not invest a few minutes: ...

[...snippety snip...]

No.

Why don't you get to grips with the notation that the entire rest of the planet gets by with perfectly well, rather than expect everyone else to submit to your made up nonsense?

Why not spend some time answering the comments you've been given rather than obfuscate and hide behind your impenetrable maths?
 
Why? Because your "simplified and less confusing notation" is so bad that even you fail to use it correctly yourself as we can see from the corrections we have had to make to your "calculations" in this very thread.

It seems that, to Wolfgang, it's complicated and difficult to say:

3x10-6 x 2x102 = (3x2)x10(2-6) = 6x10-4
because, well, I don't actually know what's so difficult about it; but easier to say,

3n4 x 3p2 = ((now let me see, no leading nines so it must be -10, so) -10+4+2)(now let me see, that's going to come out negative, so there must be an n here)n(oh, and I'd better not forget to drop the leading minus sign)3x2 = (now I know there was an n here so I have to start from -4, which has one digit, so I add 10 to get -6 and drop the minus sign)6n6

which, since it requires the same calculations exactly plus another two subtractions of ten, plus a couple of checks on a sign and one on an order of magnitude. Five additional operations to achieve the same result; clearly much simpler, right?

And the sole piece of evidence offered to support this notation is that English-speaking and non-English speaking Europe have opposite sets of definitions of commas and stops. Wouldn't it be simpler just to keep the existing, universal, simple system of scientific notation and just standardize on commas and stops, rather than chucking out the baby with the bathwater?

But then again, that wouldn't make Wolfgang feel as special.

Dave
 
Last edited:
Why don't you get to grips with the notation that the entire rest of the planet gets by

That would require some actually honest interest in the subject... and quite frankly it has been some time since the last Hoaxer who appeared to be more interested in the truth than silly ramblings.
 
Why not invest a few minutes: A simplified and less confusing notation for numbers

The purpose of this number notation:

  • transparency of order of magnitude in calculations
    [*]ease of writing


I find your notation neither easy to write, is actually less transparent in understanding order of magnitude, and most certainly NOT "simplified and less confusing.

I find it extremely easy to understand
5.1 X 102rather than the confusion of
1p51


What is one of the MOST common complaints students have when it comes to math, algebra to be specific?
"Why are there letters in there?"

Now you wish to confuse matters even more. We have V=IR. Some students have trouble with that. How can there be nothing but letters in a math equation. We explain that the letters represent variables and that if you know all but one you can figure out what the other is. In your system the letters NEVER disappear with instead of an equation in which variables are known and I=0.1 amps and R=4700 ohms
V=10-1 X (4.7X103)
you want it to be
V=1n1 X 2p1.2

Yeah having new letters suddenly appear in an equation will in no ways be confusing :rolleyes::rolleyes::rolleyes::rolleyes:

Perhaps you missed it as well, but the notation of xy is NOT an American invention unless you know something special about where Rene Decartes was born.
The micro/milli/centi/kilo/mega/tera, etc. convention is also,,,,,,iirc,,,, FRENCH in origin, Wolfgang.

Are you masking your anti-Francaphone sentiment by claiming an anti-American slant instead?
 
Last edited:

ISF - Join now!

Every member here is approved by hand. No bots, no spam, just people who care about evidence and honest debate.

Membership is free!

Create your free account

Back
Top Bottom