I'm not pretending anything. I don't know him, I'm not a member of p4t, they don't allow registration with gmail addresses, as I found out shortly before joining this site, which does. Again you lot come up with your radical assumptions trying desperately to prove that I'm something other than what I am. I once sent an email to Chandler, and got a disappointing response, I don't know Jones (the infowars one or the other one) anymore than I know Tom Cruise. I definately don't know Judy Wood, and I've had no dealings with Gage. I did get Michael Schumachers autograph once, but I think my ex-wife got it in the divorce. I'm me, doing stuff on my own, with no prior agenda.
I wasn't presenting evidence, or implying that my comments were meaningful. I was commenting about a photo I had never seen before, stop looking for meaning that isn't there, I do NOT have any hidden agenda, either individually or as part of some group of truthers, I am in complete isolation from them. I'm an aspergic bloke living in a cottage in Scotland, who suddenly finds himself with a lot of free time since I had to stop working to look after my disabled wife (Wife #2, in case you are looking for inconsistencies). I'm not affiliated to anyone else, working with anyone else, I only know a few names of people from watching videos and reading reports, I don't know the actual people. I don't exactly live in a place where massive truth conventions pass through every week where I can meet and greet and go to book signings.
Mr Clark,
Understanding something implies that you begin from a place of NOT UNDERSTANDING.
We go through life thinking we understand what we see live and on TV and so forth. We LEARNED about how the world works from experience and from being taught, formally or informally.
Many or perhaps most things about the world are little understood by most people or they have a simplistic or cartoon or shorthand understanding of it... how a kidney works, a plane stays aloft or a sailboat works... or a bomb, or fire or gravity and so on.
Physics is the grand daddy of all things to explain the world... especially mechanical "things". Chemistry is right up there to explain lots including how living things work. This can and often is too esoteric and only "experts" are facile with this level of understanding. Can you read a cat scan? No! A radioloigist is required.
On the face 9/11 seems easy to understand. Some of it. Some of it seems or feels counter intuitive. Would a high speed jumbo knock a building over? If not would it bounce off? Why not? What sort of destruction would the plane do? Well that depends on understanding physics... the speed of the plane, it's mass... where the mass was distributed... the nature of the structure of the building and so on. A plane hitting a high rise is not something anyone has experience with. We've seen smaller planes hit buildings. Can we extrapolate from that? If so how? If not why not?
The collapses of the 3 buildings were very complex and actually chaotic events. This sort of chaos is almost impossible to model because of the random nature of the events, interactions, collisions, various materials and so forth. What you get are some attempts at simplification. Or you get people drilling down and investigation one "node" a connection, a beam, a column and so on... This sort of isolation to understand the larger chaotic event is interesting, can be helpful or may not be in understand the much large complex event.
For those buildings to collapse tens of thousands... perhaps hundreds of thousands of structural failures where taking place and spread out through time with some level of interaction between the failure events.
But one needs to have some basic understanding and good powers of observation to inform you understanding.
Laws of physics cannot and were not violated. People have explained that the collapse of the twin towers was a floor slab collapse first... Mass from above an intact floor fell overwhelmed it's capacity. Sure you realize that an office floor is designed to support X pounds and no more. When X+1 falls on it it fails. Failure means it loses its integrity and cracks shatters, and probably falls down. There was way more weight coming down on an intact floor than it was able to resist.. So the collapse was unstoppable and proceeded very rapidly to the ground. The resistance of the slabs was very small compared to the impinging force. So the collapse was not much slower than and object falling through air. But it was slower for sure.
The steel columns had not to do with the collapse... didn't resist it and didn't assist it. Some argue that the strength of the connections from the floor slabs to the axial members (columns) were a weak link or weaker than the floor slabs and failed BEFORE the slabs shattered from thousands of collisions with other slabs and parts of slabs etc. The connection system DID fail... they sheared... the bend over like spaghetti and the were ripped off. The trusses which connected to the axial system also experienced failures at the connections which DID not fail.. they sheared.
The columns were left without required bracing to stand up and remain stable. Columns stability is determined by slenderness ratio and that is also dependent on the material of the column. Long and short is that the high rise columns are unstable without bracing. The bracing was ripped off by / in the floor collapse and so the unstable columns collapsed or toppled as a RESULT of the floor collapse.
The Twin tower collapses are right there and understandable with some basic physics and good observation. The blasts of debris from the building just below the collapse front is also basic physics... the air inside was displaced by the falling floor mass. This air took with it contents of / on the floors... suspended clg tiles, furniture, office contents. The blast of air burst reach as much as 200+ mph. Do the math... it's simple... very simple.
There are no proofs and the evidence is the visual record... the structural information about the buildings... the science of materials, fire and so forth.
Witnesses are incapable of using language to accurately... in a scientific, object manner what they observe... assuming they had what it takes to PROPERLY understand their observations. We all can see the clouds and the stars and movement in "the heavens"... how man can scientifically describe what they are seeing?
How do you scientifically describe very loud noises? Is there even a scientific .. objective way to describe very loud sounds? People resort to analogies... it sounded like... and that is usually a sound they heard in a movie or on TV.
LOOKS LIKE is NOT -IS-
The failure to understand 9/11 is a failure of mostly technical understanding and critical thinking. But most adult will find a way to characterize and explain everything they experience... even resorting to analogies and movies, TV etc. Truthers are driven by poor technical understanding and failure to think critically and to recognize their limitations. But they are more than willing to take a little bit of knowledge and twist it to an explanation which makes sense to them and their limited technical knowledge. How many people have hear of Euler buckling or if they have know what it is? Or modulus of elasticity?
And of course it's a fool's errand to try to explain complex, sophisticated phenomena to an uneducated person and one with a "political agenda" such as ... not trusting a word from an authority figure. You don't have to trust them to understand... but you do have to technically INFORM yourself to understand.
++++
Do you think it's hard to fly a plane into the twin towers? I could see them from 50 miles away! Aiming at something when sailing or flying is not terribly difficult especially with little cross winds or currents. You just keep the target on the nose until you hit it by making minor corrections and try not to over steer. I see this oversteering in novices when they try to steer a boat. But it's not hard to get the hang of it. And hitting the largest most prominent targets is not difficult at all... targets much larger than the braod side of a barn!
You clearly need to brush up on your engineering to inform your understanding. And you clearly need to stop listening to people who are technically inept regardless of how they will claim expert status.
LEARN TO THINK
Asking questions and having doubts is fine. Inform yourself with technical knowledge.. basic... not PhD level.