You Can't Fly A 757 Like That!

not the photo and video yopu posted, as I said, it was a late 1980's dc-10, you can apologize anytime and beg for forgiveness if you wish

what posted is the stretch version in your photo, used for trans oceanic flights, it's sad that people like you will go to extremes to CYA when you are proven wrong

that is when MD placed the 3rd engine in their line

But I see that you like to argue in childism methods, so I'll just move along and smile for proving you wrong
From Wiki...
Early twin-jet designs were limited by the FAA's "60-minute rule", whereby the flight path of twin-engined jetliners was restricted to within 60 minutes' flying time from a suitable airport, in case of engine failure. In 1964 this rule was lifted for trijet designs, as they had a greater safety margin. This led to a flurry of trijet designs, which by 1980 had become the most popular airliner configuration.
Generally, passenger airline trijets are considered to be second generation jet airliners, due to their innovative engine locations, in addition to the advancement of turbofan technology.
Same Source (and personal knowledge)
The McDonnell Douglas DC-10 is a three-engine medium- to long-range widebody airliner, with two engines mounted on underwing pylons and a third engine at the base of the vertical stabilizer. The model was a successor to the company's DC-8 for long-range operations, and competed in the same markets as the Airbus A300, Boeing 747, and Lockheed L-1011 Tristar, which has a similar layout to the DC-10.
Production of the DC-10 ended in December 1988 with 386 delivered to airlines and 60 to the U.S. Air Force as air-to-air refueling tankers, designated the KC-10 Extender.[1] The DC-10 was succeeded by the related McDonnell Douglas MD-11 which entered service in 1990.
First flight of the 3-engined aircraft was in 1970. Never changed outer configuration
 
not the photo and video yopu posted, as I said, it was a late 1980's dc-10, you can apologize anytime and beg for forgiveness if you wish

what posted is the stretch version in your photo, used for trans oceanic flights, it's sad that people like you will go to extremes to CYA when you are proven wrong

that is when MD placed the 3rd engine in their line

But I see that you like to argue in childism methods, so I'll just move along and smile for proving you wrong
The DC-10 was always a three engine configuration. Always. From the beginning. Three engines.

Maybe you can demonstrate that I am wrong, but I doubt it.

There is no shame in being wrong; the same cannot be said for refusing to own your mistakes when they are pointed out to you.

Childism indeed.
 
what posted is the stretch version in your photo, used for trans oceanic flights, it's sad that people like you will go to extremes to CYA when you are proven wrong

that is when MD placed the 3rd engine in their line


Uh, do you have any idea of how difficult it'd be to add an engine in the tail to an existing aircraft design? You're talking about major changes in structure, weight, centre of gravity, hydraulic lines, fuel lines, and many, many other internal components, not to mention changes in aircraft performance in terms of drag, climb, speed, range, and so forth. It's not like Lego, you just can't add a piece without any appreciable penalty. It's actually a major engineering endeavour.

The fact that you're (apparently) seriously proposing this shows you are either woefully misinformed or are being deliberately foolish.

The DC-10, as others have already pointed out, was always a three-engined design. End of story.
 
not the photo and video yopu posted, as I said, it was a late 1980's dc-10, you can apologize anytime and beg for forgiveness if you wish

what posted is the stretch version in your photo, used for trans oceanic flights, it's sad that people like you will go to extremes to CYA when you are proven wrong

that is when MD placed the 3rd engine in their line

But I see that you like to argue in childism methods, so I'll just move along and smile for proving you wrong

what the hell is "childism" Mr. NIST Scientist?

TAM:)
 
Wow, what a childish and immature rtesponse, the moderators should remove your posting privileges, I have read your posts and that are not worthy of being submitted in an adult forum

I recommend to everyone to file a complaint to have you banned and barred from posting on this medium/

are you drunk, or is English not your first language?

Seriously. Not an insult, but an honest question.

TAM:)
 
From Wiki...

Same Source (and personal knowledge)

First flight of the 3-engined aircraft was in 1970. Never changed outer configuration
Ouch the professor just got SPANKED!
Now that is going to leave a mark!
:big:
 
Thank you thank you!
He is entertainment gold that is for sure.
Does anyone in the aircraft design field actually refer to a plane as the, "stretch" version?
Maybe the professor thinks that limos fly.
Actually, yes.
The best known was a stretched DC-9 (i think it was the 9)
 
Actually, yes.
The best known was a stretched DC-9 (i think it was the 9)

There was also a "stretch(ed)" DC-8. Officially known as the '7o's model as opposed to the '60's models.

I do not know of any others....

ETA: Now that I think about it more, some DC-8 fuselage's were stretched during the late '60's while retaining the original engines and when it was retrofitted with updated engines it was then called the '73 model.

I just happened to recall that I flew as a passenger in one to Thailand in 1968.

ETAA: The stretched model began in 1965 and were generally known as the late 60's stretched models. The retrofitted engines also began at the same time, but the super efficient engines were fitted to the 70's models.

Wikipedia is your friend.....
 
Last edited:
The DC-9 came in several different fuselage lengths, morphing into the MD-80, the MD-90, and eventually the Boeing 717.
 
not the photo and video yopu posted, as I said, it was a late 1980's dc-10, you can apologize anytime and beg for forgiveness if you wish

what posted is the stretch version in your photo, used for trans oceanic flights, it's sad that people like you will go to extremes to CYA when you are proven wrong

that is when MD placed the 3rd engine in their line

But I see that you like to argue in childism methods, so I'll just move along and smile for proving you wrong

For the record, "Professor" (*snort*): The DC-10 twin engine was a proposal made back in the 70s, but never actually produced.

Wikipedia article on the DC-10 said:
The DC-10 began production in 1968 with the first deliveries in 1971. Several artists impressions exist of an aircraft named the "DC-10 Twin" or DC-X which McDonnell Douglas considered in the early 1970s but never built. This would have been an early twinjet with a striking likeness to the Airbus A300 and similar performance characteristics, which was never progressed to a prototype. It could be argued that this was a major mistake on the part of McDonnell Douglas as it would have given them an early lead in the huge twinjet market that subsequently developed, as well as commonality with much of the DC-10's systems and engineering. Poor airline acceptance was cited at the time for not proceeding.

Source: http://en.wikipedia.org/wiki/McDonnell_Douglas. My bolding above, for emphasis.

Also: Readily available information demonstratest that none of the DC-10's were ever "stretched"; on the contrary, Boeing's own "General Technical Characteristics" site actually lists the first model as being the longest by just under two feet, although that is listed as the "overall length"; whether that difference is due to a genuine fuselage difference or comes from some other component, I don't know. The point is that if anything, the jet shrunk, albeit by a relatively insignificant amount, from the original -10 model. At any rate, the dash 10 to the -40 models all maintained a consistent fuselage length of 170 ft 6 in, and the -15's to the -40's all maintained an overall length of 180 ft. The -30 and -40 models gained a bigger wingspan, and the -15's through the -40's all had stronger engines than the -10, but there is no information I can find that says the DC-10 was ever "stretched" in the 80's.

Sources: Wikipedia article linked above, Boeing article linked above, Taxiways.net's, and Airliners.net's writeups on the DC-10

Information on the DC-10 can easily be found at Boeing's site (Boeing because that was the company that took over Mcdonnell-Douglas assets in 1997):

http://www.boeing.com/commercial/dc-10/

According to all the information I can find, at no time during it's production life was the DC-10 ever a twin engine. Repeat: At no time. If you have a source that demonstrates otherwise, please post it or provide a citation we can verify independently.
 
Last edited:
DC-9

ETA: I'm not a old fart, just an well informed new fart.....

I was looking for an RF-4 or a DC-9; me got KC-135

The stretch C-141. You need an airframe that is easy to modify.


The DC-9 would have been a cool early out of the AF; however, the AF had numerous jobs that kept me interested.

I am not an old... "I ain't as good as I once was, but I am as good once as I ever was." tk (I have the wood of the large tree to prove this)

7603 upt; what was yours? omg i may be the o.f
 
Last edited:
Lots of Hollywood Celebrities/Studios had DC-9's. I happened to be in OKC on one occasion and walked through one. It was reputed to be Sylvester Stallone's, but it actually belonged to the studios he worked for....

It was not uncommon back when.......
 
not the photo and video yopu posted, as I said, it was a late 1980's dc-10, you can apologize anytime and beg for forgiveness if you wish

what posted is the stretch version in your photo, used for trans oceanic flights, it's sad that people like you will go to extremes to CYA when you are proven wrong

that is when MD placed the 3rd engine in their line

But I see that you like to argue in childism methods, so I'll just move along and smile for proving you wrong


Where do you get this stuff? You are just making this up as you go, arentcha? A twin engined DC-10? BTW, all versions of the DC-10 except the -10 model(that is, the DC-10-10) are capable of long range transoceanic flight. McDonnell Douglas produced no underwing mounted twin-engined jet airliners ever...ever.

While its true, that the DC-10 offered several models, the -10, -30, and -40(the latter two incorperating a center landing gear assembly for increased gross weight), with different power plant options(P&W JT9D or GE CF-6)....the number of engines were the same for all models. Three.

The stretched DC-10 that was developed in the late 80s was launched as the MD-11 . It too had three engines.

If you have some inside industry knowledge of a twin engined DC-10, feel free to post a link. Otherwise, please stop this asinine charade. There are several knowedgable aviation people in this thread, myself included. You are fooling no one.


ETA: The Royal New Zealand Air Force never flew any model of the DC-10, but they do fly the 757.Hmmm

yellow_warning.gif
No results found for "new zealand air force DC-10".
Results 1 - 10 of about 185 for "new zealand air force 757". (0.11 seconds)
 
Last edited:

ISF - Join now!

Every member here is approved by hand. No bots, no spam, just people who care about evidence and honest debate.

Membership is free!

Create your free account

Back
Top Bottom