WTC Dust Study Feb 29, 2012 by Dr. James Millette

Wow, bad news. He added a lot of sparkle to this place.

If you're in touch with his loved ones please add my name to the list of those sending condolences.
 
Very sad he left us, family and friends so early. Please pass along the condolences of those of us at JREF, that although did not know him personally, thought highly of him from his long distance intelligent and kind conversation with us.
​

bloger_405.jpg
9372355321_ba0ee37a1d_m.jpg
 
Last edited:
I really appreciated the high intellectual level and accuracy of his comments. {:^(
 
I'm so very sad with the news. His contributions to this forum have been so valuable. My condolences to his girlfriend, his family and friends.

A tragic weekend after also F1 test pilot María de Villota passed away last Friday.
 
Last edited:
Hi friends,
I hope that for a few days the JREF monitors will allow us to use this thread to honor our friend Ivan, since he made such valuable contributions to the WTC dust discussion. I just got this email from his Daniela:

"I thank you for nice words about Ivan. He was really very good man and we had each other exceptionally nice relationship. We have been in love for the whole 8 years like in younger days. Ivan played very good piano and guitar, he was excellent musician also. We played guitar together for time to time in the evening.
"He has died of chronic heart failure. At autopsy they have found, that he had atherosclerosis of II. and III. level. He didn´t have any symptom at al!! We didn´t anticipate it at all. We used to hike oft, Ivan was always lively, vital. I was more tired then Ivan, I didn´t suffice him. We were together in Madeira 3 weeks ago death, Ivan ran there like young man, he was there enthusiastic.(in supplement of mail I send our together photo) Only the last month he had trouble, we thought, that problem is in digestion."

I'm sure Daniela as well as Ivan's family would appreciate any kind words and remembrances we may have of Ivan. I will link her to this page of this thread...

Gratefully,
Chris Mohr
 
Here is the email exchange that ended with me finding out about Ivan's death (way too young, I'm about to turn 60 myself so this really gets me where I live). You can see it involves an older email exchange where I give Steven Jones one of Ivan's posts. Unfortunately, when I copied the post, Ivan's links were stripped out. I was asking Ivan about his old post and where I might find it. If anyone knows, I'd be grateful. As you can also see, Jones now knows about Ivan's and Dave's discovery or iron-rich spheres from burning paint at regular fire temperatures:

Hi Ivan,

This is an old email exchange with Steven Jones, which I have revived to let him know about you and Dave Thomas and your discovery of iron-rich spheres in the burning of regular primer paint on steel. I looked at the old email, which quotes one of your old posts extensively. Unfortunately, the links in this post no longer work. Can you connect me to the original of this?

Thanks
Chris


On Tuesday, October 8, 2013 7:43 AM, Chris Mohr <[email protected]> wrote:
Hello again Steven,

Last spring you asked me to address the iron-rich micropheres post-ignition, and I managed to goad two scientists into buring primer paint on steel in a regular fire. Here is one result: http://www.youtube.com/watch?feature=player_embedded&v=wLyYv5Y2YSM. Iron-rich spheres were created, as you can see. Here is another chemist from the Czech Republic who also burned primer paint on steel and photographed spheres that look very much like the ones you showed in your thermitic paper: http://www.internationalskeptics.com/forums/showpost.php?p=9443711&postcount=3540

I hope this addresses your first question.
As for one of my questions: will you please release your TEM and FTIR data from your 2009 thermitic paper? I have discussed this with Ken Jenkins. I am still hoping for the public release of this important data.
Thank you for your consideration,
Chris Mohr
From: Steven Jones <[email protected]>
To: Chris Mohr <[email protected]>
Cc: Jeffrey Farrer <[email protected]>
Sent: Tuesday, January 15, 2013 7:39 AM
Subject: Re: Info on the red-grey chips and Jim Millette

Chris,

I ask you to address:

1 - the appearance of iron-rich micro-spheres after ignition of the red-gray chips we studied (not present before ignition);
2 - the independent tests of red-gray chips undertaken by Mark Basile.

Thank you,
Steven J

On Tue, Jan 15, 2013 at 8:42 AM, Chris Mohr <[email protected]> wrote:
Hi Jeff and Steven,

I just wanted to keep you up on some things I've read re the red-grey chips. First, an email I got from Jim Millette last year; then some postings on JREF. Jim Millette is still hoping to finish his study of the chips and publish his conclusions some time this year.

Chris Mohr



I asked Jim Millette last year why he didn't do a DSC test, here is the email he sent back, verbatim and unedited:

Chris,

My assessment of the situation is that researchers performed DSC on some WTC chips and found what they thought was an exothermic reaction. They then formed a hypothesis that this might be caused by thermite materials in the dust. As is required in scientific inquires their hypothesis was testable. They set out to confirm their hypothesis by testing the chips. Their microscopical analysis showed some results that they concluded were consistent with thermite or nano-thermite. I was asked to analyze the materials to see if I could confirm or not confirm their conclusion. My initial tests showed similar findings in terms of the characteristics of the chips. However, additional testing following analytical forensic methods showed that the chips were not thermite or nano-thermite. We repeated the tests on 4 different samples from different locations and found the same result – not thermite. It seems to me that the ball is now in their court. The DSC testing can suggest a type of material based on thermal properties but cannot be used to prove the existence of thermite. If they believe that the DSC results clearly show an exothermic reaction they need to come up with another testable hypothesis as to what the chips are as they are not thermite.

Jim


From Ivan at JREF:

- About one year ago we predicted that all red-gray chips analyzed by Jim Millette will be compatible with paints (on rust flakes). This really happened, all chips contained only kaolinite instead of aluminum. Such composite cannot be thermite.

- Because of these finding we can easily predict that these red/gray chips would behave like paints in DSC device under air, i.e. they will show similar curves as in Fig. 19 in Bentham paper.

E.g., here are calorimetry curves for cured pure epoxy resin Epon 862 (left) and its mixture with 5 % of silica (right). (HRR means heat release reate):



And here is a Fig. 19 from Bentham paper:



As you can see, curves in Fig. 19 are compatible with the combustion of epoxy resin just shown. Hence, all these results, including Fig. 19, are compatible with epoxy paints

(Note: HRR for epoxy are much higher than in Fig. 19, and I don't know the reasons at the moment; one factor is anyway clear: all red-gray chips burned in Bentham paper contained gray incombustible layer of iron oxides, which substantially lowered heat released from one gram of sample.)

I've been pointed out several times here that DSC is not a good/common method for determining the heat release during thermal-oxidative degradation/combustion of polymers since, among others, the mass of sample is dramatically changing during measurements and combustible vapors/gases are(can be) blown out with the stream of air, hence they can "escape" from the measured "space" prior their ignition/combustion). This is why it is so difficult to find papers showing e.g. DSC curves of thermally decomposed epoxy resins.

Howeve r, other, more suitable methods are available.

In the paper I've just cited above, a quite new device/method was employed for examining heat release rate (and overal released heat).
A device called Microscale Combustion Calorimeter, MCC was employed for the combustion of epoxy resin composites.

A quote from here: "A very small quantity of sample (1–4 mg) is pyrolyzed under nitrogen flow at a constant heating rate (typically 1 K/s) and the released gases are sent to an oven and burnt in presence of oxygen at 900 °C. These conditions allow complete combustion. The heat release is calculated according to the Huggett’s relation (1 kg of consumpted oxygen corresponds to 13.1 MJ of released energy)."

Here are some more curves obtained using MCC: < /span>


A typical "MCC curve" for polymers (caption: Fig. 1. Typical HRR curve using MCC apparatus (example: Polyamide 6)):



Some more MCC curves for epoxy resins/their composites:





We can see that "MCC curves" can be/are similar for various polymers and they basically indicate: at temperatures around 400 degrees C, polymers are massively degraded under inert and their combustible/vaporized degradation products are then burned in air/oxygen.

Question is why DSC curves in Fig. 19 (Bentham paper) are so similar to all these MCC curves. It seems to me that just accidentally (?), the most/substantial part of flammable vapors/gases formed by the rmal-oxidative degradation of polymer binder in these red-gray chips was really combusted closely to the chips; therefore the thermal effect of these processes was recorded by DSC device, at least partially.

(Note: quite clearly, MCC device is much more suitable for measurements of thermal effects during heating of red-gray chips than DSC. This method allows in principle - among others - to determine if the thermal effect belongs to thermitic reaction, since no flammable gaseous products, which can be then ignited in air, are formed during burning of (pure) thermites. Hence, "MCC curve" for pure thermites should be basically flat.
 
Hi friends,
I hope that for a few days the JREF monitors will allow us to use this thread to honor our friend Ivan, since he made such valuable contributions to the WTC dust discussion. I just got this email from his Daniela:

"I thank you for nice words about Ivan. He was really very good man and we had each other exceptionally nice relationship. We have been in love for the whole 8 years like in younger days. Ivan played very good piano and guitar, he was excellent musician also. We played guitar together for time to time in the evening.
"He has died of chronic heart failure. At autopsy they have found, that he had atherosclerosis of II. and III. level. He didn´t have any symptom at al!! We didn´t anticipate it at all. We used to hike oft, Ivan was always lively, vital. I was more tired then Ivan, I didn´t suffice him. We were together in Madeira 3 weeks ago death, Ivan ran there like young man, he was there enthusiastic.(in supplement of mail I send our together photo) Only the last month he had trouble, we thought, that problem is in digestion."

I'm sure Daniela as well as Ivan's family would appreciate any kind words and remembrances we may have of Ivan. I will link her to this page of this thread...

Gratefully,
Chris Mohr

His family, this forum and the world is a little sadder place now.

Rest In Peace.
 
So unfortunate to lose a great person like Ivan so soon.

So fortunate to have so many of his great words written in this forum to inspire us all.
 
I am very sorry to read this sad news. Chris, if you're in contact with Ivan's family, please do pass along my sincere condolences as well.
 
Hi friends,
I am going to link Daniela to this page, which is so full of all your wishes for the family etc. and such positive thoughts for our friend. Daniela just sent me this funeral announcement, which I have translated via google:

When the day comes and I sleep, come to my grave look, just look and do not cry too much, who has fallen asleep, everyone sleeps like a saint is the silent night, when the day comes.


The pain in his heart announce to relatives and friends that we ever left our dear son, partner, father, grandfather, brother and uncle, Mr.
Ing. Ivan Kmínek, PhD.
He died suddenly on Tuesday, 3 September 2013 at the age of 60 years.
The funeral will be held on Tuesday 10th September 2013 at 15.15 hours in the ceremonial hall of the crematorium in Prague - Motol.
On behalf of the family:
Ruzena mother
Daniela partner
Tereza, Martin, Verunka children
Jirka, Petr brothers
 
Another email from Daniela she asked to pass along:

Dear Chris,

I thank you that you give news about Ivan on the JREF blogs. I know that Ivan has watched and contributed on the JREF very extensively and really with great enthusiasm. I have also watched his discussions for years.
I also thank very much all Ivan´s friends on the JREF for really nice words about him. But read these words about Ivan, it is still very painfull for me.
Please, Chris, you can give this email on the thread like thanks for kindly words of your friends.

I wish you and your friends on the JREF only well.
Daniela
 

ISF - Join now!

Every member here is approved by hand. No bots, no spam, just people who care about evidence and honest debate.

Membership is free!

Create your free account

Back
Top Bottom