The ballad of the 911 shill

Status
Not open for further replies.
So, at minimum, you agree that the Korol analysis is complete garbage and you apologize for this whole back and forth, right? You also agree you completely fabricated your 99% heating in 25-30 min claim to try to win an argument? You see now that the beam could have already been heated to nearly 400 C when Korol begins his heating at 20 C, right?

Come on--muster your intellectual honesty for once.

No, I believe the Korol analysis is the closest to reality, with NIST quite a bit to the high side and Beyler's analysis way out of the ballpark.

I didn't fabricate anything. I was saying that most of the heating would take place in the time frame where the fire was directly under the structural members. That is true.

You know unlike the case of WTC 7, NIST actually got and tested some of the steel from the fire affected zones in the Twin Towers to see what temperatures it had experienced. All but three pieces out of the 170 tested hadn't experienced anything beyond 250 C with nothing beyond 600 C.
 
Last edited:
No, I believe the Korol analysis is the closest to reality, with NIST on the high side and Beyler's analysis way out of the ballpark.

I didn't fabricate anything. I was saying that most of the heating would take place in the time frame where the fire was directly under the structural members. That is true.

You said specifically that 99% of heat transfer would occur in 25-30 min. There is zero support for that in the NIST report, which you specifically cited in support, or in the literature in general, including the experimental studies you have previously cited.

How did the beam in NIST's simulation get to 400 C with 1% of the heat transfer energy?

You really can't bring yourself to be intellectually honest at all. It's crazy.

Reattaching your theory graph and the floor 13 beam temps (and, by the way, the next stop on the rope-a-dope express is the fact that NIST did not believe the worst fires were on floor 12 and, in any event, NIST never tried to model a "worst case" fire on any floor.)
 

Attachments

  • NIST NCSTAR 1-9 pg 390 10-1 SZAMBOTI DELUSION.jpg
    NIST NCSTAR 1-9 pg 390 10-1 SZAMBOTI DELUSION.jpg
    33.2 KB · Views: 0
  • NIST NCSTAR 1-9 pg 452.jpg
    NIST NCSTAR 1-9 pg 452.jpg
    34.1 KB · Views: 0
Last edited:
You said specifically that 99% of heat transfer would occur in 25-30 min. There is zero support for that in the NIST report, which you specifically cited in support, or in the literature in general, including the experimental studies you have previously cited.

How did the beam in NIST's simulation get to 400 C with 1% of the heat transfer energy?

You really can't bring yourself to be intellectually honest at all. It's crazy.

Reattaching your theory graph and the floor 13 beam temps (and, by the way, the next stop on the rope-a-dope express is the fact that NIST did not believe the worst fires were on floor 12 and, in any event, NIST never tried to model a "worst case" fire on any floor.)

Get real, what I am saying is true. Most of the heating to high temperatures takes place with direct fire and that doesn't last more than about 30 minutes. Actual testing shows that. The NIST fire simulation temperatures are also on the high side. The Twin Tower steel that was tested told the real story and that is much more in line with what Korol was saying. The actual heating is almost never as efficient as NIST wants to claim and the steel doesn't get nearly as hot, and it doesn't get anywhere near what Beyler wants to say.
 
Last edited:
Get real, what I am saying is true. Most of the heating to high temperatures takes place with direct fire. NIST is also on the high side with their temperatures. The Twin Tower steel that was tested told the real story and that is much more in line with what Korol was saying. The heating is almost never as efficient as NIST wants to claim and it doesn't get anywhere near what Beyler wants to say.

When you look at the graph that you cited in support of your 25 min heat transfer time theory, can you come up with any hypothesis as to how the beam in the NIST simulation closest to the point at which NIST sampled gas temperatures for that graph reached about 400 C at 4:30, Tony?

It's just sad that you are reduced to blatantly making stuff up and denying reality--even the reality of the sources you cited, sources that everyone in this thread can plainly read. Let me attach them again.
 

Attachments

  • NIST NCSTAR 1-9 pg 452.jpg
    NIST NCSTAR 1-9 pg 452.jpg
    34.1 KB · Views: 0
  • NIST NCSTAR 1-9 pg 390 10-1 SZAMBOTI DELUSION.jpg
    NIST NCSTAR 1-9 pg 390 10-1 SZAMBOTI DELUSION.jpg
    33.2 KB · Views: 0
Last edited:
When you look at the graph that you cited in support of your 25 min heat transfer time, can you come up with any hypothesis as to how the beam in the NIST simulation closest to the point at which NIST sampled gas temperatures for that graph reached about 400 C at 4:30, Tony?

It's just sad that you are reduced to blatantly making stuff up and denying reality--even the reality of the sources you cited, sources that everyone in this thread can plainly read. Let me attach them again.

Are you saying the NIST fire simulation represented reality? I think they are a good bit to the high side. The actual temperatures of the steel in the Twin Towers proved that. Have you ever read James Quintiere's critique of the NIST WTC fire simulation?

Beyler takes the cake for being in another world with his fantastic steel temperatures. They could never happen.
 
Last edited:
It's one reasonable approximation of an unknown reality, yes. In fact, you cited to it! Apparently you don't really understand it, though, do you?

You are talking like a lawyer working for a client trying to nitpick and make your case no matter what the reality is. I am talking reality. Go get the Beyler analysis. I really don't have any more to say to you until you get it.
 
Last edited:
You are talking like a lawyer working for a client trying to nitpick and make your case no matter what the reality is. I am talking reality. Go away.

You're talking reality? Is that why you fabricated a claim that 99% of the heat transfer to a given building element in the wtc 7 fires would take place in 25-30 min? You completely, utterly, and baldly lied about that right in this thread.

Is your devotion to reality why you cite to and support Korol's paper, even though it ignores 4.5 hours of heating while claiming to be based on NIST's fire model? You're fine with a "reality" where analysis starts on a beam that is 380 C too cold?

Earth to Tony--re-read this thread. Nothing you have said has been true. Every point you brought up has been chased back to the source and back to reality. That hasn't agreed with you very well so now you are trying to change the subject from Korol's model, which is indefensible, to WAI's model.

It's really been a sad spectacle, Tony. Hope your next year is better. Get help.
 

Attachments

  • NIST NCSTAR 1-9 pg 452.jpg
    NIST NCSTAR 1-9 pg 452.jpg
    34.1 KB · Views: 0
  • NIST NCSTAR 1-9 pg 390 10-1 SZAMBOTI DELUSION.jpg
    NIST NCSTAR 1-9 pg 390 10-1 SZAMBOTI DELUSION.jpg
    33.2 KB · Views: 1
Last edited:
Benthamitemetric, if you are confident in what you say then you absolutely need to get Beyler’s analysis. That is the only way you can prove your case, as the NIST fire simulation temperatures for floors 9 and 10 do not support Weidlinger’s hypothesis.
 
Benthamitemetric, if you are confident in what you say then you absolutely need to get Beyler’s analysis. That is the only way you can prove your case, as the NIST fire simulation temperatures for floors 9 and 10 do not support Weidlinger’s hypothesis.
Why can't you do this?
 
Benthamitemetric, if you are confident in what you say then you absolutely need to get Beyler’s analysis. That is the only way to truly settle this. The NIST temperatures for floors 9 and 10 do not support Weidlinger’s hypothesis.

We don't need anything from WAI to discuss how incorrect Korol is, actually. That is patently obvious to you and everyone else. You can't bring yourself to actually criticize his demonstrably flawed approach, however, so you are trying to punt. You also can't be honest and just apologize for fabricating claims in your ill-fated attempt to defend Korol.
 
We don't need anything from WAI to discuss how incorrect Korol is, actually. That is patently obvious to you and everyone else. You can't bring yourself to actually criticize his demonstrably flawed approach, however, so you are trying to punt. You also can't be honest and just apologize for fabricating claims in your ill-fated attempt to defend Korol.

The NIST fire simulation does not support Weidlinger's hypothesis and the extreme steel temperatures at the 9th and 10th floor that Weidlinger claims. Weidlinger is actually an unsupported report right now without Beyler's analysis being public information.
 
Last edited:
The NIST fire simulation does not support Weidlinger's hypothesis.

You need Beyler's analysis to do that if it truly shows a basis for the kind of temperatures at the 9th and 10th floor that Weidlinger claims. Weidlinger is actually an unsupported report right now without Beyler's analysis being public information.

And this conversation is about Korol's methodology--or at least it was until I showed you the chart of floor 13 beam temperatures and you realized how doomed your argument was.

What do you need from WAI in order to be able to say whether Korol's methodologies are sound?

Reattaching your favorite graph and chart.
 

Attachments

  • NIST NCSTAR 1-9 pg 452.jpg
    NIST NCSTAR 1-9 pg 452.jpg
    34.1 KB · Views: 1
  • NIST NCSTAR 1-9 pg 390 10-1 SZAMBOTI DELUSION.jpg
    NIST NCSTAR 1-9 pg 390 10-1 SZAMBOTI DELUSION.jpg
    33.2 KB · Views: 1
The NIST WTC 7 report has been shown to be invalid and so has ARUP and Weidlinger has no support for its steel temperature claims.

At this time I can honestly say in a court of law that there is no valid publicly available analysis showing WTC 7 came down due to fire.
 
The NIST WTC 7 report has been shown to be invalid and so has ARUP and Weidlinger has no support for its steel temperature claims.

At this time I can honestly say in a court of law that there is no valid publicly available analysis showing WTC 7 came down due to fire.

Why are you dodging on Korol's methodologies? I gave you the floor 13 beam chart and suddenly you can't even bring yourself to talk about them.

What else do you need to evaluate whether Korol's approach makes sense?

Here's the chart and graph again.
 

Attachments

  • NIST NCSTAR 1-9 pg 452.jpg
    NIST NCSTAR 1-9 pg 452.jpg
    34.1 KB · Views: 1
  • NIST NCSTAR 1-9 pg 390 10-1 SZAMBOTI DELUSION.jpg
    NIST NCSTAR 1-9 pg 390 10-1 SZAMBOTI DELUSION.jpg
    33.2 KB · Views: 2
The NIST WTC 7 report has been shown to be invalid and so has ARUP and Weidlinger has no support for its steel temperature claims.

At this time I can honestly say in a court of law that there is no valid publicly available analysis showing WTC 7 came down due to fire.

And I can show you perjure yourself Tony if you say that under oath, and it is not that hard to do.
 
Why are you dodging on Korol's methodologies? I gave you the floor 13 beam chart and suddenly you can't even bring yourself to talk about them.

What else do you need to evaluate whether Korol's approach makes sense?

Here's the chart and graph again.

You keep squirming trying to get there in areas you don't have enough detail on.

The reality is there is currently no valid publicly available analysis that shows WTC 7 collapsed due to fire.
 
You keep squirming trying to get there in areas you don't have enough detail on.

The reality is there is currently no valid publicly available analysis that shows WTC 7 collapsed due to fire.

Why can't you say that Korol's usage of a 25-30 min heat transfer time was flawed? You can keep trying to change the subject, but it won't work. It just shows your incredible capacity for dishonesty in the interest of trying to argue for your cause--which is exactly the sort of thing you claim to be fighting against. I'm more than happy to discuss NIST vs WAI more, but not until we finish our discussion on Korol's paper, which was the basis you previously cited for your objections to WAI's approach.

A few hours ago you were accusing me of not understanding heat transfer, etc etc. You also fabricated the notion that a given structural element would only be heated for 25-30 min by the wtc 7 fire based on NIST's fire simulation (and specifically figure 9-9 of the WTC 7 report). You should prove your points or retract them. It's not that I don't think it is worthwhile to expose your lies in such a painfully drawn out and well documented way, it's that it doesn't feel quite right to keep doing it if you truly are so hobbled by delusion that you just can't even help but lie like this.

Relevant figures attached as always.
 

Attachments

  • NIST NCSTAR 1-9 pg 452.jpg
    NIST NCSTAR 1-9 pg 452.jpg
    34.1 KB · Views: 1
  • NIST NCSTAR 1-9 pg 390 10-1 SZAMBOTI DELUSION.jpg
    NIST NCSTAR 1-9 pg 390 10-1 SZAMBOTI DELUSION.jpg
    33.2 KB · Views: 2
  • NIST NCSTAR 1-9 pg 379 9-9.jpg
    NIST NCSTAR 1-9 pg 379 9-9.jpg
    19.2 KB · Views: 1
Last edited:
You keep squirming trying to get there in areas you don't have enough detail on.

The reality is there is currently no valid publicly available analysis that shows WTC 7 collapsed due to fire.

https://www.science.gov/topicpages/s/shear+lag+theory.html

"Mitigating shear lag in tall buildings

NASA Astrophysics Data System (ADS)

Gaur, Himanshu; Goliya, Ravindra K.

2015-09-01

As the height of building increases, effect of shear lag also becomes considerable in the design of high-rise buildings. In this paper, shear lag effect in tall buildings of heights, i.e., 120, 96, 72, 48 and 36 stories of which aspect ratio ranges from 3 to 10 is studied. Tube-in-tube structural system with façade bracing is used for designing the building of height 120 story. It is found that bracing system considerably reduces the shear lag effect and hence increases the building stiffness to withstand lateral loads. Different geometric patterns of bracing system are considered. The best effective geometric configuration of bracing system is concluded in this study. Lateral force, as wind load is applied on the buildings as it is the most dominating lateral force for such heights. Wind load is set as per Indian standard code of practice IS 875 Part-3. For analysis purpose SAP 2000 software program is used."
 
At this time I can honestly say in a court of law that there is no valid publicly available analysis showing WTC 7 came down due to fire.


A court of law cannot ignore the structural buckling of WTC 7 as observed by a number of people just prior to its collapse, which is firm evidence that fire, in conjunction with impact damage, was responsible for the collapse of WTC 7.

As pointed out on a number of occasions, there is absolutely no evidence the collapse of WTC 7 was a CD operation and that explains why after 15 years, investigations have found no such evidence.

To prove a valid point that CD explosives had nothing to do with the collapse of WTC 7, please point out video timelines where CD explosions are heard in the following video as WTC 7 collapses, and if you fail to post such times lines for everyone to see, the case will be closed due to lack of CD evidence. In case you missed it, here's the video.


WTC 7 Video

https://www.youtube.com/watch?v=LD06SAf0p9A


.
 
Last edited:
Status
Not open for further replies.

ISF - Join now!

Every member here is approved by hand. No bots, no spam, just people who care about evidence and honest debate.

Membership is free!

Create your free account

Back
Top Bottom