Origin of the paint that was found as red-gray chips - any ideas?

Excuse my ignorance, but are you saying you agree with Steven Jones that has said nano thermite can be painted into steel and that when it dries it becomes a "high explosive" as he said in the Jesse Ventura show on 911?

What I am saying is that because nanothermite ignites at a much lower temperature than thermite or thermate, it is capable of being used as an ignition method.

MM
 
What I am saying is that because nanothermite ignites at a much lower temperature than thermite or thermate, it is capable of being used as an ignition method.

MM

I am not qualified to know. I would like to know if you think Steven Jones was wrong when he said that it can be painted onto steel and that when it dries it becomes a high explosive.
 
A) How they got the massive amount of thermite into to the building?
B) How the bomb dogs missed not 1, but 2 types of thermite being applied?
C) How the materials made it through, undamaged or ignited, when the plane hit the towers?
D) How not one person saw the extreme bright light that is emitted when thermite is triggered? (outside of one video, on one section of the tower, that could be a few different things.

MM, could I get an answer to this please.

Faffing is a slang term for ****** around.
 
What I am saying is that because nanothermite ignites at a much lower temperature than thermite or thermate, it is capable of being used as an ignition method.

MM

So, not a potential "explosive" that could bring down WTC7? Glad we cleared that up. You really wouldn't choose an explosive to ignite an incendiary. Trust me on this. So what's your new theory on WTC7? Conventional high explosives? Hmm?

Meanwhile may I refer you to my post just above?
 
I am not qualified to know. I would like to know if you think Steven Jones was wrong when he said that it can be painted onto steel and that when it dries it becomes a high explosive.

Is that what he said?

Or did he say that it could be painted on to steel and be used as a method of ignition?

I do believe that Dr. Harrit and others, have hypothesized and proven, that when combined with certain organics, nanothermite has significant explosive properties.

MM
 
So, not a potential "explosive" that could bring down WTC7? Glad we cleared that up. You really wouldn't choose an explosive to ignite an incendiary. Trust me on this. So what's your new theory on WTC7? Conventional high explosives? Hmm?

Meanwhile may I refer you to my post just above?

Did I say that?

I don't believe I did.

Are you spinning to support your bigoted beliefs?

I believe you damn well are.

MM
 
Faffing is a slang term for ****** around.

MM could have either worked that out, or looked it up :cool:

MM is talking bollocks, knows it, and finds it necessary to buy time by feigning ignorance on some internet forum backwater.

Go figure
 
What I am saying is that because nanothermite ignites at a much lower temperature than thermite or thermate, it is capable of being used as an ignition method.

How come so much of it failed to ignite?

Do you people actually bother thinking these things through to a logical conclusion?
 
Is that what he said?

Or did he say that it could be painted on to steel and be used as a method of ignition?

...

MM
It's so cute how you think no one can tell you're evading.

Do bother thinking period?

This has been answered countless times.

Overkill was employed.

MM
It's also cute how you keep spinning those plates to avoid being wrong on anything. You're arguing that the conspirators used more than was strictly necessary in order to be sure, in the process increasing the complexity of the installation, and massively increasing the risk evidence would be discovered, and, according to you, actually was. Ever heard of the KISS principle? It doesn't have any reason to do with a rock band, hint hint.
 
Last edited:
Re: Steel anticorrosion primers in the TT:
Table abbreviated. Tons for both Towers.
My primer notes in ( ) added

NCSTAR 1-3A http://fire.nist.gov/bfrlpubs/fire05/PDF/f05157.pdf

Total tonnage ~ 190,000 tons of steel for both Towers

Laclede tonnage from http://survivethejivealive.blogspot.com/

As far as I could find, the NIST Tnemec primer spec (Tnemec 69,95)came from Piitsburg-De Moines Steel Co, who only fabricated the 4th to 9th floor exterior columns.
NCSTAR 1-3C
ETA: Found Tnemec 99 specified by Pacific Car Foundry for their exterior columns. It appears this is Pacific's specs for their primer for their work. "Please find PCH (Pacific Car and Foundry) painting spcecifications ..." Tnemec 99
NCSTAR 1-6A
http://fire.nist.gov/bfrlpubs/build05/PDF/b05035.pdf


Approximately 94,600 tons of steel with known primers (Tnemec and Laclede. Leclede primer for the trusses may represent more paint by steel weight, due to their greater surface area to weight ratio) ; 95,400 tons with unknown steel primers.
This may explain other steel anti-corrosion primer paints that may be found.

ETA: I see Oystein, Lefty and Ivan talked about this some months ago. This at least further defines and quantifies.
Had I read their posts, I would have been reading the Sunday NY Times at Starbucks instead.

Thanks for bringing that up again in a post that is at the same time comprehensive enough and brief!

Yes, we talked about these things months ago, but your thorough listing of which primers are known to have been used where is a great help!






All others, who are participating in useless speculation about stupid scenarios are NOT helping, are cluttering up this space and wasting there and my time and energy while not working towards any progress or increased knowledge. I wish you would learn to stop responding to trolls at least in this thread. Thank you very much for your future discipline and co-operation, Edx, GlennB, Justin39640, leftysergeant, plague311.
 
... I do believe that Dr. Harrit and others, have hypothesized and proven, that when combined with certain organics, nanothermite has significant explosive properties.

MM
Dr Harrit is nuts on this issue.

If they proved thermite was used, then they would have a Pulitzer. It is that simple. Too bad their insane claims of thermite are delusional nonsense. Your posts are typing practice for JREF; thank you for the quick fox jumping over the fence again. Or was it the jumping the shark one more time.

Why not take this to 60 minutes? Too bad your 911 truth nuts are not a big enough issue to make a 60 minutes segment exposing the ignorance and fraud of 911 truth.
 
Thanks for bringing that up again in a post that is at the same time comprehensive enough and brief!

Yes, we talked about these things months ago, but your thorough listing of which primers are known to have been used where is a great help!






All others, who are participating in useless speculation about stupid scenarios are NOT helping, are cluttering up this space and wasting there and my time and energy while not working towards any progress or increased knowledge. I wish you would learn to stop responding to trolls at least in this thread. Thank you very much for your future discipline and co-operation, Edx, GlennB, Justin39640, leftysergeant, plague311.

In your own words, there's an ignore button. I have no issues being on the list. I comment when I feel it is needed, and feel my comments are warranted.

Thanks.
 
Hmm.

I have never seen paper get hot enough to melt steel?
I have never seen jet fuel burn hot enough to melt steel?
I have never seen plastics burn hot enough to melt steel?
You should consider the 'rate that the energy is released', rather than the total amount of energy released.

MM

You said they did????:rolleyes:

How about you considering it? Are you really saying you are capable of making the appropriate calculations?:rolleyes:

I'd love you to show that its impossible for burning paper, jet fuel or plastics to melt iron oxides.....
 
Re: Steel anticorrosion primers in the TT:
Table abbreviated. Tons for both Towers.
My primer notes in ( ) added
Fabricator ..........Component ..........Tons
Pacific Car and Foundry Co. Exterior columns and spandrels ( Tnemec 99) 55,800
Montague Betts Co., Inc Rolled columns and beams above 9th floor (Primer unknown) 25,900
Pittsburgh-Des Moines Steel Co. Bifurcation columns 4th to 9th floor (Tnemec 69,95 primer) 6,800
Atlas Machine & Iron Works Box columns below the bifurcation columns to 4th Floor (Primer unknown) 13,600
Mosher Steel Co. Core box columns below the 9th floor (Primer unknown) 13,000
Stanray Pacific Corp. Core box columns above the 9th floor (Primer unknown) 31,100
Levinson Steel Co. Supports for slabs below grade (Primer unknown) 12,000
Laclede Steel Co. Floor trusses [Tonnage 24,000 from link below] (Laclede primer)
Drier Structural Steel Co., Inc. Grillages Unknown tonnage (Primer unknown)
Total 141,170 tons [bad math]

Approximately 94,600 tons of steel with known primers (Tnemec and Laclede. Leclede primer for the trusses may represent more paint by steel weight, due to their greater surface area to weight ratio) ; 95,400 tons with unknown steel primers.
This may explain other steel anti-corrosion primer paints that may be found.

ETA: I see Oystein, Lefty and Ivan talked about this some months ago. This at least further defines and quantifies.
Had I read their posts, I would have been reading the Sunday NY Times at Starbucks instead.

Thanks a lot, BasqueArch. Yes, we have discussed it, but your list is very helpful. Let's just hope that "Laclede paint chips" are really abundant in the dust:cool: It seems to be sure that Jim Millette will find several kinds of red paint chips, but we are still basically interested only in chips identical with Bentham chips (a) to (d) (or MEK chip).
Apparent problem is that if other red chips are found by Jim Millette, they can be soon declared as other candidates for evil pyrotechnics used for CD (no matter what their composition is). If I remember correctly from NIST reports, some manufacturers of WTC steel (e.g. Montague Betts Co) do not keep the documentation concerning the WTC construction (because of some internal policy/rules), so there is basically no way how to find the composition of "their" steel primers.

With my pidgin English, I'm not going to comment those two articles on 911debunkers.blogspot.com, it's really better to wait until some real results of Jim Millette's study are out;)
 
Last edited:

ISF - Join now!

Every member here is approved by hand. No bots, no spam, just people who care about evidence and honest debate.

Membership is free!

Create your free account

Back
Top Bottom