Well I would watch from 1:40 on in the first video. But I would really suggest watching them all. But 1:40 and on in the first video, should have all you need in it.
Does that mean you were calling me a "facepalm" initially? And how am I the ostrich when I'm trying to figure out WTF you guys are talking about? You make no sense.
It's no problem. The video was taken down in excess of a year ago. I don't know seems like it shouldn't be a big deal to archive it. But I only ask you really keep an open mind. If you're really interested in finding out the truth, there is a lot of good information out there. Don't believe what anyone tells you, including me, verify everything you can yourself.
It's no problem. The video was taken down in excess of a year ago. I don't know seems like it shouldn't be a big deal to archive it. But I only ask you really keep an open mind. If you're really interested in finding out the truth, there is a lot of good information out there. Don't believe what anyone tells you, including me, verify everything you can yourself.
Maybe you should take your own advice. Try stepping outside the truth-o-sphere to actually verify things. I'm going to go ahead and guess that you won't, however.
Do you believe Chandler? If so, you should modify your beliefs, because this is what Chandler says about his measurements of real CD's..
'have done measurements on several known demolitions, using similar software tools, and found that they typically fall with accelerations considerably less than freefall. '
Oops!!
Watch the videos NIST themselves says free-fall is impossible. Yet in there final report says there is free fall. This is for building 7.
I suppose if you cherry-pick a couple of words out of context you might be able to claim that Shyam Sunder said that. But he didn't.
First, he specifically explains the loading function of gravity, and that the measurement they took was for an approximately 17-floor portion of the building to collapse out of view.
The freefall time for that would have been 3.9 seconds. But NIST's measurement showed that this was approximately 5.4 seconds, which is roughly 40% longer than freefall alone would have produced.
Your quotemine does not address his reiteration of this point. You have actually reversed the meaning of what he really said, so shame on you for that!
Going on, you've completely omitted this important statement that follows..
'And that is not at all unusual because there was structural resistance provided in this particular case.. and you had a sequence of structural failures that had to take place..and everything was not instantaneous'
Now, to your claim that NIST, in this video (were you claiming it was Dr Sunder?) said that freefall was impossible...
I can't find a statement from Dr. Sunder which says that freefall was impossible, you'll have to provide a transcript for us, as I have just done for you. That is the minimum you need to do to support your claim.
Your claims are not supported by the statements of Dr. Sunder. Chandler's own measurements of real CD's show him that they do not 'typically' fall at freefall!!
So your own sources refute the conclusions!! Go figure
Were you not so eager to accept every CLAIM you hear, without actually examining the evidence for that claim, you would not have fallen for the nonsense that they are peddling. Remember, as I have demonstrated a number of times in my videos, truthers often attach a conclusion or claim to evidence which does not support it - sometimes it is just laughably easy to see, as with this video. Here I used the same title as IC911Studies, partly as a Trojan Horse, and partly to comment on the idiocy of the title itself...
Here is my video response to Chandler's false claims. Notice I allow comments, whereas Chandler, ever the coward, does not. He accuses nameless others of heinous crimes, yet will not submit himself to cross-examination. What a bloody hypocrite!
It's no problem. The video was taken down in excess of a year ago. I don't know seems like it shouldn't be a big deal to archive it. But I only ask you really keep an open mind. If you're really interested in finding out the truth, there is a lot of good information out there. Don't believe what anyone tells you, including me, verify everything you can yourself.
Only if by "verify everything you can yourself" you mean "hit every truther site/youtube vid possible", right?
After all, you answer every question by posting "look at this" with a linky to some other idiot truther pretending he/she knows more than the professionals.
You have been shown, with cold hard fact and reality, that your heroes are wrong.
What's next? You tell a police officer that he can't pull you over because some idiot on youtube said so?
Your faith is grossly misplaced. I hope you grow up someday.
You don't have to believe a word I tell you. You don't have to believe a word Chandler tells you. Watch the videos NIST themselves says free-fall is impossible. Yet in there final report says there is free fall. This is for building 7.
Have you watched Chris Mohr's analysis of the collapse of WTC7? You'd know that nearly 4 seconds of free-fall collapse means nothing.
What is clear about the collapse of WTC7 is that it began and spread internally, which is why it doesn't show surface evidence of fire damage on all sides.
Chandler's biggest problem is that, he doesn't make sure that refresh rates on his video match those of the video used by NIST. (Gross mentioned at a NIST press conference that their video was a 30fps source. We don't know what Chandler's was). So, all the frame-stepping that Chandler does could be for naught if the frames in each video don't advance at the same speed, and if they don't begin at the same point in time (he does seem to be aware of the need to start at the collapse of the penthouse and move backwards).
Broadcast television in America is 60Hz (fps). Videographers know this, as well as making sure to take into account interlaced vs de-interlaced video.
Only if by "verify everything you can yourself" you mean "hit every truther site/youtube vid possible", right?
After all, you answer every question by posting "look at this" with a linky to some other idiot truther pretending he/she knows more than the professionals.
You have been shown, with cold hard fact and reality, that your heroes are wrong.
What's next? You tell a police officer that he can't pull you over because some idiot on youtube said so?
Your faith is grossly misplaced. I hope you grow up someday.
The NIST data suffers from the following (non-exhaustive) series of technical issues, each of which reduce the quality, validity and relevance of the data in various measures...
NIST did not deinterlace their source video. This has two main detrimental effects: 1) Each image they look at is actually a composite of two separate points in time, and 2) Instant halving of the number of frames available...half the available video data information. Tracing features using interlaced video is not a good idea. I have gone into detail on issues related to tracing of features using interlaced video data previously.
NIST did not sample every frame, reducing the sampling rate considerably and reducing available data redundancy for the purposes of noise reduction and derivation of velocity and acceleration profile data.
NIST used an inconsistent inter-sample time-step, skipping roughly every 56 out of 60 available unique images. They ignored over 90% of the available positional data.
NIST likely used a manual (by hand-eye) tracking process using a single pixel column, rather than a tried and tested feature tracking method such as those provided in systems such as SynthEyes. Manual tracking introduces a raft of accuracy issues. Feature tracking systems such as SynthEyes employ an automated region-based system which entails upscaling of the target region, application of LancZos3 filtering and pattern matching (with FOM) to provide a sub-pixel accurate relative location of initial feature pattern in subsequent frames in video.
NIST tracked the *roofline* using a single pixel column, rather than an actual feature of the building. This means that the trace is not actually of a point of the building, as the building does not descend completely vertically. This means the tracked pixel column is actually a rather meaningless point on the roofline which wanders left and right as the building moves East and West.
NIST used the Cam#3 viewpoint which includes significant perspective effects (such as early motion being north-south rather than up-down and yet appearing to be vertical motion). It also means that each horizontal position across the facade requires calculation of a unique scaling metric, which NIST do not appear to have bothered to do.
NIST did not perform perspective correction upon the resultant trace data.
NIST did not appear to recognise that the initial movement at their chosen pixel column was primarily north-south movement resulting from twisting of the building before the release point of the north facade.
NIST did not perform static point extraction(H, V). Even when the camera appears static, there is still (at least) fine movement. Subtraction of static point movement from trace data significantly reduces camera shake noise, and so reduces track data noise.
NIST did not choose a track point which could actually be identified from the beginning to the end of the trace, and so they needed to splice together information from separate points. Without perspective correction the scaling metrics for these two points resulted in data skewing, especially of the early motion.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.