• Quick note - the problem with Youtube videos not embedding on the forum appears to have been fixed, thanks to ZiprHead. If you do still see problems let me know.

This is the thread that may very well change the way you look at 9/11 FOREVER!

YOO HOO, 28TH - TECHNICAL QUESTIONS STILL TOO HARD?

Come on, you're the one that posted the original question; scared to respond? Can you respond?

Mind you, you're making a right eejit of youself with the thermite/ate thing too.

De ye kin whit an erse ye'r makin' o' yersel? (as we say in Scotland)
 
Nobody here would bet their house that the black molten metal in this pic is actually slag from where a torch cut it...I'm just speechless that you people are claiming that.

Mock outrage...never seen that before

You're remarkably talkative for someone who's speechless, why not give your mouth a rest so your brain has a chance to function?
 
And to anyone who questions..what I'm doing on a stupid internet forum..instead of going out and trying to get into science journals and such...well, just think of this as a case study... I can't believe I have been so fortune as to stumble upon a community of people who are such diehard skeptics of the PET. See, if I can find out what it would take to awaken one of you...than I can get feedback and see exactly what it will take to awaken even the most incredulous individuals.



Easy: real facts, as opposed to wild speculations based on hearsay, personnal incredulity and 3 minutes videos, rational arguments, actual knowledge in the subjects you want to discuss, readiness to listen to contrary opinions, to learn and to answer questions. So far, you failed on all those points ...
 
Mock outrage...never seen that before

You're remarkably talkative for someone who's speechless, why not give your mouth a rest so your brain has a chance to function?


There's a good phrase in Gaelic which would translate as "Delusions of Adequacy". I think it applies to Pd'oh, 28th, and SuperSubmersible.
 
NO, all you see is a big black gook of IRON that has melted on top of it. Couldn't be any more obvious...

umm.... this column is hollow.
If thermite was used to melt down all the stuff above it - pre-collapse - why is the centre of the column not filled up with molten metal, debris and so on? There's just a bit of melted 'stuff' around the cut section, that doesn't even spread much farther than the cut.
 
46 posts a day is definitely a PD'oh trait

I think the stuff about communists and socialists is just him try to mimic "American hero" Alex Jones in an attempt to appear USian when he was doing all that sir and ma'am stuff and trying to stay in character. he usually picks a stylistic tick but fails to keep it going.
 
I know we've all seen a silver-colored steel pipe...that's been cut with a torch...and at the edge of the cut...days after...when the black soot is cleaned off...the edge of the pipe remains bubbled from slag...and this bubbled part of the pipe IS ALWAYS the same color as the rest of the pipe. IT'S NOT BLACK.
 
I know we've all seen a silver-colored steel pipe...that's been cut with a torch...and at the edge of the cut...days after...when the black soot is cleaned off...the edge of the pipe remains bubbled from slag...and this bubbled part of the pipe IS ALWAYS the same color as the rest of the pipe. IT'S NOT BLACK.
28th,

How does your interpretation of the image support your claims as to the nature of the damage observed?
 
I know we've all seen a silver-colored steel pipe...that's been cut with a torch...and at the edge of the cut...days after...when the black soot is cleaned off...the edge of the pipe remains bubbled from slag...and this bubbled part of the pipe IS ALWAYS the same color as the rest of the pipe. IT'S NOT BLACK.
Further proof that you have no idea what the hell your talking about.

Please explain the OBVIOUS NOTCHING EFFECT in the picture you are refering to.
 
I know we've all seen a silver-colored steel pipe...that's been cut with a torch...and at the edge of the cut...days after...when the black soot is cleaned off...the edge of the pipe remains bubbled from slag...and this bubbled part of the pipe IS ALWAYS the same color as the rest of the pipe. IT'S NOT BLACK.

Macaroon:
That's after they take a grinder to it and remove the slag built up around the edge.

I'm sorry, not the answer. Please try again. This time using real knowledge.
 
I know we've all seen a silver-colored steel pipe...that's been cut with a torch...and at the edge of the cut...days after...when the black soot is cleaned off...the edge of the pipe remains bubbled from slag...and this bubbled part of the pipe IS ALWAYS the same color as the rest of the pipe. IT'S NOT BLACK.

You've just debunked yourself again, even if the blackening was just soot (which it isn't) it could be soot on your column, which no-one would bother to clean off...
 
LISTEN UP! To all who work with metal. IF YOU CAN go and cut some steel...to the point where you have some nice slag...and then let it cool...and completely wash it off...IF YOU CAN TAKE A PICTURE of your work, and show me where the slag has changed colors from the original color of the steel you are working on. I WILL USE MY FULL EFFORTS TO GO ON PET BOARDS...AND CONVINCE THEM THAT YOU GUYS ARE RIGHT AND THAT OBL IS RESPONSIBLE FOR 9/11.
 
LISTEN UP! To all who work with metal. IF YOU CAN go and cut some steel...to the point where you have some nice slag...and then let it cool...and completely wash it off...IF YOU CAN TAKE A PICTURE of your work, and show me where the slag has changed colors from the original color of the steel you are working on. I WILL USE MY FULL EFFORTS TO GO ON PET BOARDS...AND CONVINCE THEM THAT YOU GUYS ARE RIGHT AND THAT OBL IS RESPONSIBLE FOR 9/11.


Why? You wont be any better at convincing them of that than you are of convincing us of your pet theory.
 
To save time, let me answer with what Macaroon will say after one of you does this;

Not the same kind of steel.
You didn't wash it.
You secretly used thermite.
It was painted to look like slag.

I wish the local football team had goalposts that moved like this. Maybe then they could win a game or two.

Oh, and;

What a macaroon!
 
All this resurfacing thermite talk made me look around a bit.

I especially like this video: http://www.amazingrust.com/Experiments/how_to/Videos/Fe3O4/3/Thermite(Fe3O4)3%5BBest%5D.wmv

Note the big white flash. Note that this load of thermite was not even able to melt the iron pot it was filling. Now imagine hundreds of heavy steel beams being cut within a few seconds by thermite. The towers would have lighted up like christmas trees.

Oh, and Kingdom, your picture clearly show a steel bean that was cut by a cutting torch. Why, you can even see the groves. Also, this coincides with our knowledge that cutting torches were used widely during the clear-up opration.

:rolleyes:

Hans
 
LISTEN UP! To all who work with metal. IF YOU CAN go and cut some steel...to the point where you have some nice slag...and then let it cool...and completely wash it off...IF YOU CAN TAKE A PICTURE of your work, and show me where the slag has changed colors from the original color of the steel you are working on. I WILL USE MY FULL EFFORTS TO GO ON PET BOARDS...AND CONVINCE THEM THAT YOU GUYS ARE RIGHT AND THAT OBL IS RESPONSIBLE FOR 9/11.

You think they washed the column in the picture? Really?
Really really?
 
LISTEN UP! To all who work with metal. IF YOU CAN go and cut some steel...to the point where you have some nice slag...and then let it cool...and completely wash it off...IF YOU CAN TAKE A PICTURE of your work, and show me where the slag has changed colors from the original color of the steel you are working on. I WILL USE MY FULL EFFORTS TO GO ON PET BOARDS...AND CONVINCE THEM THAT YOU GUYS ARE RIGHT AND THAT OBL IS RESPONSIBLE FOR 9/11.

It's not about us persuading you, it's about you persuading the world.

You are just part of a dwindling minority of unprepossessing loons. Scientific, engineering, architectural, political and media consensus is against you, everywhere in the world.

Honestly, the CT boards don't matter. We only do this stuff so there's a source of information for normal but not well informed people - hopefully it'll save them some embarrassment when they realise what's what.

Nutters like you are a lost cause.
 
Uh... yes?

Well, you have RAW EVIDENCE, don't you? Sorry, spent too much time in the Realistice thread.

Oh, I have TOTALLY RAW EVIDENCE, MASSIVELY RAW EVIDENCE. Why would you think I would post a SELF-DeBUNKing post? I never did that, just as I never claimed that this is a picture of a BLACK CAT that uses a GINSU sword!

94904557a77b202df.jpg


I mean, seriously, it like we're walking in Tokyo, and I'm like, "Hey, look, it's the Statue of Liberty!", and you're like, "Huh? Where?", and I'm all, "It's right there, dude!", and you're totally, "NOPe! Don't see it, you must be the loonY-tunes, dude!", Seriously, it's just like that, I tell you to see the NOT a Cat (Rabid DINGO) in this picture, and you're all, That's a giant Neon sign, guys!

94904574d8b0e3f1c.jpg


REBUNKED!!!!!11!!!1!
 

Back
Top Bottom