Summary of WTC tower collapses

Just as a backstory, the purpose behind the graphic - and jaydeehess is quite right, it's only a (very simple) graphic, not a scientific schematic - was to use as a reference point for erroneous observations about the collapse that muddied discussion and allowed truly ludicrous proposals to slip in. Things like claims that the structure was turned to dust, or that the entire lower portion of the building was pancaked by an intact upper section, and so on.

My primary source was video and photos of the actual collapse, photos of the debris field (particularly an enormous and sobering aerial photograph taken shortly after the collapse that showed the debris field in mind-blowing detail) with supporting input from eyewitness accounts mostly inside and above the collapse area.

The basic point was to establish that there were essentially three basic elements to the building; exterior columns, floor trusses, and core columns, and that each of these elements interacted with the collapse in different ways. If I did the graphic again I would probably improve it by making each of these three elements a different colour. (Admittedly that confession reveals that my original statement that I see no reason to modify it is a lie!).

The critical thing it attempted to show was basically that the collapse initiation caused failure of the integration of the three main elements, causing the elements to break apart, detatch, and fail independently of each other. The failure of each element in turn led to failure of the other elements. As a result of this structural integrity was irreversibly undermined the moment the collapse started.

It certainly wasn't intended as anything detailed or scientific, but enough to help a layman decipher the apparent chaos of the event. As an example, without any sort of knowledge the debris field just looks like a random mess of building, but if you are familiar with the structural elements you recognise that floor truss, core column and exterior column debris form three distinct debris fields, and these alone tell us quite a lot about how the collapse progressed - namely that the floor trusses collapsed vertically onto each other with tremendous force, that the exterior columns peeled away from the structure and fell outwards in large swathes, and that the core structure failed last. Watching video of the collapse confirms these three distinct behaviours.
 
Take care - it is a good overall summary BUT if anyone reads detail into it the way JSO did in a recent comment - the sequence is not quite right. (e.g. probably the main issue I would watch - tilt came before drop)

In this context tilt is just asymmetrical drop. So they happened at the same time.
 
Revision 4 (Final):

Generic Description of the Collapse Progression of the Two WTC Towers:

Video evidence demonstrates aircraft impact destroyed or bent a number of perimeter columns. A lesser amount of core column severance or damage is expected. Some floor spans also directly damaged.

Aircraft fuel spread through several vertically adjacent floors of the structure and ignited. This created a condition of very large area office contents fire on those floors with various levels of "rubblization" of the contents. This is a fire condition well beyond design expectations for fire spread. Office fires are expected to usually begin small, in a waste basket, or an electrical fault in a device or circuit, for instance.

Aircraft impact debrided spray on fire insulation in varying degree, on a significant number of structural components on impact floors. This reduced fire resistance of those structural steel components.

Structural response to impact was a redistribution of loads previously carried by missing or foreshortened ( due to being bent) columns. Load redistribution was not even across all remaining columns.

Fire spread and movement was similar, but not identical, on each involved level and also spread to higher levels. Heat began affecting steel structural components, both vertical and horizontal, and the connecting components between them on all fire involved levels.

Floor spans had long trusses with their lower chords exposed to the heat and the trusses in several areas began sagging. A few areas had already seen truss or truss to perimeter connection failure at impact.

Perimeter columns and truss to perimeter connecting components heated less than the core columns and truss to core structure components. The interface between long span trusses and core was a belt truss rather than direct connection to core columns.

Core columns are subject to heating basically from all sides, over the several floors fully involved in the fires, and over the course of fire spread around each level.
( that is to say a column at level x may heat more on one face than that same column at level x-1 or x+1 but that over the several levels involved some columns are heated on all sides and taking into account the changes through time)
The capability of the structure to resist any collapse was being eroded. One very obvious indication of this is the inward bowing of part of the perimeter. Each tower also twisted and tilted noticeably up to collapse. These demonstrate that the structure was responding to further weakening due to the heat. Loads were continually changing and redistributing during this time.
At some point a redistribution caused one or more columns to exceed its capacity. Column capacity in this case does not necessarily mean it original engineered load bearing ability. Loads were not necessarily on axis (due to impact or heat unduced creep, or expanding floor beams) and many columns were subjected to significant heating, both of which would tend to lower any individual column's strength.

At one point a rapid progression of column failures occurs. A column or columns fail and in redistributing the load, cause other columns to exceed capacity, causing another rapid load shift. Column failures rapidly progressed to all columns over one or more levels

With all columns now having failed over one or more adjacent levels, a large section of the upper building is now falling, accelerating through approximately the distqnce of one level, to next contact. A combination of factors result in few, if any, buckled columns impacting on lower parts of themselves. Upper falling section column ends are, in many locations, the first contacts with lower structure. That contact would be proximate to the lower section columns and thus the greatest impact occurs near or directly on lower floor truss to column connecting components immediately failing the lateral support provided by those trusses. This is occurring both to long span truss to column connecting components, at perimeter and belt truss, as well as with the core's beams running between core columns.

As upper mass continues its lowest floor begins contacting floorspace below the initial failure level. This first contact is between floor systems that are already severely compromised. They are among those that have been affected by impact and heat and one has suffered loss of connections to columns as per last paragraph.

With columns largely being bypassed by the vast majority of falling upper section, they contribue very little in opposing collapse.

Concrete floor pans shatter.

Both upper structure and lower structure now have major connection failures, both in the vertical/horizontal connections as well as connections between column sections. The later is due to both the destruction of lateral support and the buffeting collisions from the falling mass.

Perimeter column "trees" peel away, the first to do so are on the order of 1000 feet above ground as they pivot away.

Collapse continues with a relatively small amount of falling mass being ejected at the collision interface. Since initial contact was an order of magnitude greater than that which the long span open floors could absorb, little effect is seen on the falling mass. This means that the still intact portion of upper mass will continue to accelerate.

Further contact of falling upper mass with lower structure will have mutual destruction of both. As collapse continues lower levels will be impacted by more mass , albeit more rubblized, that is necessarily moving faster than first contact. Those floor spans must also be hit by an order of magnitude greater load than they can withstand, and indeed greater than at that earlier, first contact impact.

There existed no mechanism by which this floor pan, truss and perimeter peel, destruction could be arrested as this continues.

The core area beam destruction may well have lagged that of the long span destruction since those beams are heavier and shorter. Evidence for this is the so called "spire" of core structure that existed momentarily after the rest of one tower had fully collapsed. Perimeter peel necessarily lags long span destruction as it is a direct result of that long span truss destruction.

Core columns stripped of inter-core lateral support succumb to a combination of slender column buckling and heavy buffeting from falling debris. A relatively small, heavily damaged, portion of the core remains after long span floor and perimeter destruction (no longer being buffeted by debris impact) but cannot remain intact and it comes apart as well



This graphic, by poster "gumboot", illustrates some of the features described in this summary.
 
Last edited:
In this context tilt is just asymmetrical drop. So they happened at the same time.
That is a global conflation which we could pursue in discusion but no point doing so IMO.

JDH is happy with the near enough version.

You are happy with near enough.

My word of caution was explicit. There MAY be some opponents who will dig deeper than either you or JDH intend.

It would be simple to adapt the graphic to match the real sequence.

The risk is probably low. And both of you judge that avoiding the risk is not worth the effort.

I agree - if anyone gets into serious discussion with someone in the target group for JD's summary there will be a lot more issues of confusion to overcome.
 
This is my rewrite/interpretation. I would perhaps KEY the description with #s related to the graphic.

Revision 4 (Final):

Generic Description of the Collapse Progression of the Two WTC Towers:

Video evidence demonstrates aircraft impact destroyed or bent a number of perimeter columns and several core column were severed others damaged by the impact with plane parts. Some portions floor slabs broke free of the columns and dropped.

Aircraft fuel spread dispersed through the impact area and some amount poured down to intact floors below. Some of the fuel atomized, flashed over and the fires quickly involved all flammable office contents and building materials. The sprinkler system was disabled... water poured from broken pipes and turned to scalding steam ineffective at suppressing the flames. These uncontrolled fires exceeded expectations for fire spread in an office fire. (Office fires are expected to be small, such as isolated to a waste basket, an electrical fault etc.)

Aircraft parts including the fuel impacting the sprayed on fire insulation on steel structural members to varying degrees. The over heated steel began to lose strength, expand and sag in some cases.

The loss of axial members (columns) led to a redistribution of loads previously carried severed or severely compromised columns. Load redistribution increased the service loads of adjacent undamaged columns which may also have lost capacity from heating.

Fire spread through the structure... hot gases and flames involved floors above as finding shafts and broken floors to pass vertical... the initial fuel poured down through shafts and broken floors to involve floors below in flames. The fires would then expand horizontally consuming all available flammables.

Outside the core slabs supported on bar trusses began to sag as the exposed trusses were subject to the heat of the fires and extremely hot rising gases.

Outside the core trusses were spaced at 80" and supported on angles welded to the spandrel plates at the perimeter and a continuous "belt" girder which was cantilevered off the core whose columns spacing far exceeded (and did not match) the floor truss spacing. The sagging and the heating of the slabs was causing the concrete to spald and the trusses to began to deform and break up constrained by the perimeter columns and the stiff belt girders. The heat was destroying the outside the floor composite of steel and concrete.

Core columns were subject to uneven heating from all sides, over the several floors which were fully involved in the fires as fire spread around each level. Uneven heat will promote warping and distortion as well as reduced capacity in portions of the steel.

The overall capability of the structure to carry the service loads was being eroded bit by bit. One indication of loss of capacity was the inward bowing of part of the perimeter.

As the fire progressed, structueal members losing strength,service loads were we being redistributed to an increasing weaker and distorted axial structure (columns).

At some point the load redistribution caused (several) column(s) to exceed design capacity. Column capacity in this case does not necessarily mean it original engineered load bearing ability. Failed column to column connections allowed mis alignment of columns to column connection destroy the joint's ability to convey loads downward to the foundation leading once again to load redistribution to the fewer and fewer remaining performing columns.

As the columns were failing one at a time, the aggregate capacity was redistributed until the loads equalled the capacity of the remaining columns. As the fire continued to weaken and distort the structure... the aggregate axial column capacity dropped below the service loads and everything carried by the columns could not be supported. This led to an asymmetrical downward movement of the upper portion. Remaining columns severely buckled forcing the entire structure to tilt and move toward the weakest side of the damaged area.

With all columns at the plane strike zone having failed the 3 story tall columns led to a large section of the tilting upper building to begin falling, accelerating until contact with the structure below with few, if any, upper and lower columns impacting on each other as they were mis aligned when the last columns engaging top and bottom buckled.

Upper falling section column ends in many locations contact beans or slabs of intact building below. The massive misaligned upper and lower sections mutually destroy themselves where they contact. Through the process, parts of floors have been losing support and break free and dropping... leading to over loading of the portions of the floors below they land on. This either destroys a local area of the impacted floor and or breaks connections to the axial structure. The collapsing sections of floor slabs are now the driving destructive force.

Perimeter column "trees" peel away, the first to do so are on the order of 1000 feet above ground as they pivot away.

Collapse continues with a relatively small amount of falling mass pushed outward at the collision interface.

Further contact of falling upper mass with lower structure will cause a mutual destruction of both. As collapse continues the yet undamaged upper level interface will be impacted by a growing mass, albeit more rubblized. The dynamic load imposed by the falling mass far exceeds the design capacity of the composite floors they fall on.

The structural design for the lightweight composite floors including their connection to the axial system did not include the strength to withstand the imposed dynamic loads. Arrest of the collapse of this magnitude was not possible.

The core area beam destruction may have lagged that of the long span destruction since those beams are stronger and spans shorter. The longer "survival" of so called "spire" of some of the core structure supports the notion that its floor and bracing design was somewhat stronger than the long span region. Perimeter peel a result of the floor collapse lags the outside the core floor destruction.

Core columns, like the facade were stripped of the inside the core lateral support succumb to a combination of slender column buckling and jostling from falling debris and even wind. A relatively small, heavily damaged, portion of the core remains after long span floor and perimeter destruction (no longer being jostled by debris impact) but collapses from instability absent the required bracing.



[qimg]http://www.internationalskeptics.com/forums/imagehosting/thum_10153457c3b098ae34.jpg[/qimg]

This graphic, by poster "gumboot", illustrates some of the features described in this summary.
 
Revision 4 (Final):

Generic Description of the Collapse Progression of the Two WTC Towers:

Video evidence demonstrates aircraft impact destroyed or bent a number of perimeter columns. A lesser amount of core column severance or damage is expected. Some floor spans also directly damaged.

Aircraft fuel spread through several vertically adjacent floors of the structure and ignited. This ((nullified, the action of fire retardant materials, and created)) very large area office contents fire on those floors with various levels of "rubblization" of the contents. This is a fire condition well beyond design expectations for fire spread. Office fires are expected to usually begin small, in a waste basket, or an electrical fault in a device or circuit, for instance.

Aircraft impact debrided spray on fire insulation in varying degree, on a significant number of structural components on impact floors. This reduced fire resistance of those structural steel components. ((Evidence suggests fire damage to the core drywall allowed for a substantially strong stack effect with hurricane force winds though the core.))

Structural response to impact was a redistribution of loads previously carried by missing or foreshortened ( due to being bent) columns. Load redistribution was not even across all remaining columns.

Fire spread and movement was similar, but not identical, on each involved level and also spread to higher levels. Heat began affecting steel structural components, both vertical and horizontal, and the connecting components between them on all fire involved levels.
((Do to the weakening of the crystalline Electromagnetic bonds per Maxwell's theory of a metal exhibiting viscoelasticity at 1/4th it's melt temperature.))

Floor spans had long trusses with their lower chords exposed to the heat and the trusses in several areas began sagging. A few areas had already seen truss or truss to perimeter connection failure at impact.

Perimeter columns and truss to perimeter connecting components heated less than the core columns and truss to core structure components. The interface between long span trusses and core was a belt truss rather than direct connection to core columns.

Core columns are subject to heating basically from all sides, over the several floors fully involved in the fires, and over the course of fire spread around each level.
( that is to say a column at level x may heat more on one face than that same column at level x-1 or x+1 but that over the several levels involved some columns are heated on all sides and taking into account the changes through time)
The capability of the structure to resist any collapse was being eroded. One very obvious indication of this is the inward bowing of part of the perimeter. Each tower also twisted and tilted noticeably up to collapse. These demonstrate that the structure was responding to further weakening due to the heat. Loads were continually changing and redistributing during this time.
((As the Core Bracing failed to restrain the Columns do to itself being compromised by heat.))
At some point a redistribution caused one or more columns to exceed its capacity. Column capacity in this case does not necessarily mean it original engineered load bearing ability. Loads were not necessarily on axis (due to impact or heat unduced creep, or expanding floor beams) and many columns were subjected to significant heating, both of which would tend to lower any individual column's strength.

At one point a rapid progression of column failures occurs. A column or columns fail and in redistributing the load, cause other columns to exceed capacity, causing another rapid load shift. Column failures rapidly progressed to all columns over one or more levels

With all columns now having failed over one or more adjacent levels, a large section of the upper building is now falling, accelerating through approximately the distqnce of one level, to next contact. A combination of factors result in few, if any, buckled columns impacting on lower parts of themselves. Upper falling section column ends are, in many locations, the first contacts with lower structure. That contact would be proximate to the lower section columns and thus the greatest impact occurs near or directly on lower floor truss to column connecting components immediately failing the lateral support provided by those trusses. This is occurring both to long span truss to column connecting components, at perimeter and belt truss, as well as with the core's beams running between core columns.

As upper mass continues its lowest floor begins contacting floorspace below the initial failure level. This first contact is between floor systems that are already severely compromised. They are among those that have been affected by impact and heat and one has suffered loss of connections to columns as per last paragraph.

With columns largely being bypassed by the vast majority of falling upper section, they contribue very little in opposing collapse.

Concrete floor pans shatter.

Both upper structure and lower structure now have major connection failures, both in the vertical/horizontal connections as well as connections between column sections. The later is due to both the destruction of lateral support and the buffeting collisions from the falling mass.

Perimeter column "trees" peel away, the first to do so are on the order of 1000 feet above ground as they pivot away.

Collapse continues with a relatively small amount of falling mass being ejected at the collision interface. Since initial contact was an order of magnitude greater than that which the long span open floors could absorb, little effect is seen on the falling mass. This means that the still intact portion of upper mass will continue to accelerate.

Further contact of falling upper mass with lower structure will have mutual destruction of both. As collapse continues lower levels will be impacted by more mass , albeit more rubblized, that is necessarily moving faster than first contact. Those floor spans must also be hit by an order of magnitude greater load than they can withstand, and indeed greater than at that earlier, first contact impact.

There existed no mechanism by which this floor pan, truss and perimeter peel, destruction could be arrested as this continues.

The core area beam destruction may well have lagged that of the long span destruction since those beams are heavier and shorter. Evidence for this is the so called "spire" of core structure that existed momentarily after the rest of one tower had fully collapsed. Perimeter peel necessarily lags long span destruction as it is a direct result of that long span truss destruction.

Core columns stripped of inter-core lateral support succumb to a combination of slender column buckling and heavy buffeting from falling debris. A relatively small, heavily damaged, portion of the core remains after long span floor and perimeter destruction (no longer being buffeted by debris impact) but cannot remain intact and it comes apart as well

[qimg]http://www.internationalskeptics.com/forums/imagehosting/thum_10153457c3b098ae34.jpg[/qimg]

This graphic, by poster "gumboot", illustrates some of the features described in this summary.

JDH, the summary is great, just making a few suggestions, take them or leave them your choice. Marked them in (()).
 
was to use as a reference point for erroneous observations about the collapse that muddied discussion and allowed truly ludicrous proposals to slip in. Things like claims that the structure was turned to dust,

My primary source was video and photos of the actual collapse, photos of the debris field

If your primary source is videos and photos, and you claim that the structure was not turned to dust, then you should be able to provide videos or photos of something in the WTC1 or WTC2 debris field that confirms your statement. Steel beams don't count. Maybe you could post pictures of desks, chairs, filing cabinets and similar objects that were not completely pulverized. Also, in the collapse of two 110 story buildings, a picture or video of one chair, desk or filing cabinet is also not sufficient proof. Videos and pictures of paper also don't count.

If your claim is that the structure was not turned to dust, and your proof is nothing more than steel beams, then it's pretty obvious your claim is nothing more than a weak attempt to play the semantics game.
 
If your primary source is videos and photos, and you claim that the structure was not turned to dust, then you should be able to provide videos or photos of something in the WTC1 or WTC2 debris field that confirms your statement. Steel beams don't count. Maybe you could post pictures of desks, chairs, filing cabinets and similar objects that were not completely pulverized. Also, in the collapse of two 110 story buildings, a picture or video of one chair, desk or filing cabinet is also not sufficient proof. Videos and pictures of paper also don't count.

If your claim is that the structure was not turned to dust, and your proof is nothing more than steel beams, then it's pretty obvious your claim is nothing more than a weak attempt to play the semantics game.

I used to work in the quarry industry (on the office side of things) and was very familiar with the working definition of "dust" used. Here's an example:

Airborne particulate matter ranging in diameter from 10 to 50 microns

Above that comes the varying grades of sand, moving up to grades of gravel, (crushed stone in our case) etc etc.

If you think the non-metallic contents of the WTC were entirely reduced to dust then you're utterly wrong.

Here's one photo from many I have where many/most of the particles are in the sand-gravel spectrum:

 
If your primary source is videos and photos, and you claim that the structure was not turned to dust, then you should be able to provide videos or photos of something in the WTC1 or WTC2 debris field that confirms your statement. Steel beams don't count. Maybe you could post pictures of desks, chairs, filing cabinets and similar objects that were not completely pulverized. Also, in the collapse of two 110 story buildings, a picture or video of one chair, desk or filing cabinet is also not sufficient proof. Videos and pictures of paper also don't count.

If your claim is that the structure was not turned to dust, and your proof is nothing more than steel beams, then it's pretty obvious your claim is nothing more than a weak attempt to play the semantics game.

Complete rubbish... which of those items would you expect to find after a 400,000 ton building collapses on them... in a 15 second avalanche?

Weak things broke, broke faster, broke more completely and strong things survived longer, with less damage.

Are you comparing a computer with a steel beam in destructive survivability subject to the same forces?
 
Last edited:
CC, you suggested, among others, the inclusion of
((Do Due to the weakening of the crystalline Electromagnetic bonds per Maxwell's theory of a metal exhibiting viscoelasticity at 1/4th it's melt temperature.))

I am afraid that inclusion of such highly technical detail is not consistent with the purpose of such a summary and that it would just be "Meep-moop" (as my previous supervisor called it when I got technical) to most people
 
CC, you suggested, among others, the inclusion of


I am afraid that inclusion of such highly technical detail is not consistent with the purpose of such a summary and that it would just be "Meep-moop" (as my previous supervisor called it when I got technical) to most people

Understood but you might want to include a reference page to some of the concepts with links that answer some simple questions.
 
Hey Jaydee,

I just had an idea: I could post your Summary in my blog for a permanent reference. This would have the advantage that future updates can be done under a permanent URL. I'd of course give full credit, link this thread, etc.

You may want to designate the "first final version" as version 1.0, from where version numbers can be incremented. I'd suggest links to each version in the footnotes of the blog post.

Sounds good?
 
Hey Jaydee,

I just had an idea: I could post your Summary in my blog for a permanent reference. This would have the advantage that future updates can be done under a permanent URL. I'd of course give full credit, link this thread, etc.

You may want to designate the "first final version" as version 1.0, from where version numbers can be incremented. I'd suggest links to each version in the footnotes of the blog post.

Sounds good?
Sure. Sounds good.

I had planned one last revision but my tablet has decided that it just doesn't like wifi at the moment and my phone is ridiculous to attempt that on.

Yep ver 1.0 sounds good. I think that I have corrected all spelling errors. My stubby fingers tend to swap vowels around, I mean who thought it a good idea to put 'u' 'I' 'o' right next to each other.
 
If your primary source is videos and photos, and you claim that the structure was not turned to dust, then you should be able to provide videos or photos of something in the WTC1 or WTC2 debris field that confirms your statement. Steel beams don't count. Maybe you could post pictures of desks, chairs, filing cabinets and similar objects that were not completely pulverized.
What do desks, chairs, filing cabinets, and similar objects have to do with the structure? You do realize that there are people who claim the STRUCTURE turned to dust including some of the steel?
 
I used to work in the quarry industry (on the office side of things) and was very familiar with the working definition of "dust" used. Here's an example:

Airborne particulate matter ranging in diameter from 10 to 50 microns

Above that comes the varying grades of sand, moving up to grades of gravel, (crushed stone in our case) etc etc.

If you think the non-metallic contents of the WTC were entirely reduced to dust then you're utterly wrong.

Here's one photo from many I have where many/most of the particles are in the sand-gravel spectrum:

[qimg]http://i250.photobucket.com/albums/gg274/sap-guy/concreteremains1.jpg[/qimg]

Can you provide some sort of proof that this picture is of WTC1 and/or WTC2 debris?

Also, I don't see any chairs, tables, desks, or filing cabinets. Am I missing something?
 
What do desks, chairs, filing cabinets, and similar objects have to do with the structure? You do realize that there are people who claim the STRUCTURE turned to dust including some of the steel?
Yes, some truthers claim all sorts of nonsense. Yes, I know I have opened myself up to an insult there.

I have not, nor have I ever, claimed the steel was pulverized. You can clearly see tons of steel in the debris. My request was simple. Please provide proof that the building contents were not pulverized and turned to dust. So far, I don't see any pictures or videos that fulfill my request.

I know about the truthers who claim the planes were holograms. I know about the truthers who claim a directed energy beam was used. I know about the truthers who claim that no plane hit the Pentagon. I am not one of those truthers.
 
Complete rubbish... which of those items would you expect to find after a 400,000 ton building collapses on them... in a 15 second avalanche?

Weak things broke, broke faster, broke more completely and strong things survived longer, with less damage.

Are you comparing a computer with a steel beam in destructive survivability subject to the same forces?

At the very least, the rubble at the very top of the pile should have been relatively intact. It should not have been pulverized. Since it was pulverized, what explains the forces that pulverized the building contents on the 110th floor?

Remember, the building didn't fall at freefall, so you don't get to claim some sort of absurd velocity once it reached the top of the rubble pile on the ground. Are you going to claim crush down, crush up? I would love to know what forces pulverized the contents of the 110th floor.
 
At the very least, the rubble at the very top of the pile should have been relatively intact. It should not have been pulverized. Since it was pulverized, what explains the forces that pulverized the building contents on the 110th floor?

Remember, the building didn't fall at freefall, so you don't get to claim some sort of absurd velocity once it reached the top of the rubble pile on the ground. Are you going to claim crush down, crush up? I would love to know what forces pulverized the contents of the 110th floor.

The stuff from the upper floors apparently collapsed into the driving mass of the collapse. As such it didn't ride down the 1300 feet but what likely involved in the MOST mechanical collisions and interactions and probably the most ground up with the dust carried aloft with the lower floors more buried. I suspect there was "stuff" found throughout the debris and some of crushed by the weight of the debris on top of it.
 

ISF - Join now!

Every member here is approved by hand. No bots, no spam, just people who care about evidence and honest debate.

Membership is free!

Create your free account

Back
Top Bottom