Kid re-wires clock, gets suspended from school for "bomb hoax"

So basically what actually happened here is this kid took a nightstand alarm clock out of its plastic casing, put it into this miniature footlocker-looking box, and told everybody that it was a homemade clock he built from scratch. And people fell for it so hard that "maker" product companies are offering to send him free products now.

If he is 14 and did it himself, it seems impressive. Not world class, but he took it apart, cut some wires, cut the right size hole in the pencil box, reassembled it and soldered the wires. I know adults who can't do that.

The rewards he is getting are not related to the skill involved, nor should they be.
 
So basically what actually happened here is this kid took a nightstand alarm clock out of its plastic casing, put it into this miniature footlocker-looking box, and told everybody that it was a homemade clock he built from scratch. And people fell for it so hard that "maker" product companies are offering to send him free products now.

Nope.
 
The Dallas news reports that this 14 year old brought a clock he made to school to show his science teacher, who's advice to him was "don't show it to anyone else." And he didn't, until the alarm went off in English class. And somehow we go from teen bringing selfmade clock to school to a police officer opining "Yup, that's what I thought he'd look like" and leading him out of the school in cuffs and a three day suspension because (I'm guessing without a case over the innards) said clock looked like cartoon bomb.

People like this make me want to grab them and shake the common sense into them.

After encouraging Ahmed to keep up the good work.

First you have to shake out the fecal matter in their cranial cavity.
 
So basically what actually happened here is this kid took a nightstand alarm clock out of its plastic casing, put it into this miniature footlocker-looking box, and told everybody that it was a homemade clock he built from scratch. And people fell for it so hard that "maker" product companies are offering to send him free products now.

I don't know the details, but it easily could have been made from a commercial kit. The components (circuit board, display, switches, etc.) come unassembled and need to be mounted and connected together. Not surprisingly, these are are same components found already assembled in retail alarm clocks.

As with most digital electronics there is relatively little actual assembly of electronic components today (my Raspberry Pi project didn't even require solder to assemble- just some sockets, cables, components, and mechanical supports). Even if "only" a commercial kit or reassembly of a completed clock, I think that the kid did a good job and at 14 learned more than many of his adult teachers and cops learned their entire lives.

I used to take apart mechanical clocks when I was a kid (be careful of the mainspring- it is very angry being wound into that tight spiral!) and I regret that there is not much to see in electronic clocks today. But that is another story.
 
If he is 14 and did it himself, it seems impressive. Not world class, but he took it apart, cut some wires, cut the right size hole in the pencil box, reassembled it and soldered the wires. I know adults who can't do that.

Components in consumer electronic devices are typically secured by screws, so taking it apart required a small Phillips screwdriver - a #1 most likely to remove the components - perhaps a #2 for the casing itself.

As for cutting wires and drilling holes, I see no evidence of either of these things. The power cord clearly is just hanging over/out of the bottom of the case, with no slots or holes drilled to accommodate the cord. The LED board looks to have two screws going through it, but it is "mounted" at a weird angle and there's no way of knowing that the screws weren't simply self-drilled into the fabric lining and maybe the plastic shell of the case for instance. All of the rest of the components are simply laying in the case, secured to nothing.

It looks to me as if the components were removed from an alarm clock shell and placed, completely intact, into this case with no visible evidence of any actual modification, substituted parts, soldering of any kind, or additional wires or components.
 
So basically what actually happened here is this kid took a nightstand alarm clock out of its plastic casing, put it into this miniature footlocker-looking box, and told everybody that it was a homemade clock he built from scratch. And people fell for it so hard that "maker" product companies are offering to send him free products now.

I suspect you missed a detail or two since journalism ain't what it used to be. The numerical display was not the original, and in his DIY video interview it seems he might have used a power supply from something else.

Piss on his accomplishments all you like AFTER posting pix of your own creations. Ktnksbye.

{eta}
Or maybe some of it was a kit. The "news" stories are unclear on this.
 
Last edited:
"Rage frenzies." Indeed, I'm raging so much I'm considering just mailing him MY soldering station so he has a decent iron instead of a 4 dollar woodburning pencil.

I'm outraged by ignorant assumptions. Like that he was "passive aggressive" by insisting his clock was a clock.

And who gives a **** about him being passive aggressive, anyway? It ain't against the law. Hell, it's my basic communication mode.

So who, he or the teachers and police, have half a brain?

No, no. You can still function with half a brain. They probably had far less.
 
I don't know the details, but it easily could have been made from a commercial kit. The components (circuit board, display, switches, etc.) come unassembled and need to be mounted and connected together. Not surprisingly, these are are same components found already assembled in retail alarm clocks.

As with most digital electronics there is relatively little actual assembly of electronic components today (my Raspberry Pi project didn't even require solder to assemble- just some sockets, cables, components, and mechanical supports). Even if "only" a commercial kit or reassembly of a completed clock, I think that the kid did a good job and at 14 learned more than many of his adult teachers and cops learned their entire lives.

I used to take apart mechanical clocks when I was a kid (be careful of the mainspring- it is very angry being wound into that tight spiral!) and I regret that there is not much to see in electronic clocks today. But that is another story.

I am unconvinced that any of these are commercial parts. In particular, the long skinny board, which was the switch/button input board for whatever alarm clock it was taken from (you can clearly see the contacts for the buttons) is very obviously made to fit a specific clock's control panel. Note also the spare-9v-battery lead hanging off the logic board - standard for any alarm clock, an odd thing to include on a project board and then not use.
 
What, specifically, are you on bent out of shape about? At seems to me you're just throwing rocks at the thread.
 
Not bent out of shape; once I saw the object I became highly skeptical that it was built from "scratch", or homemade in any classical sense, as has been claimed by the student and repeated in most of the news articles.
 
Again, I'll point out that journalism ain't what it used to be. I'm sorry you suffered from it this time.
 
Not bent out of shape; once I saw the object I became highly skeptical that it was built from "scratch", or homemade in any classical sense, as has been claimed by the student and repeated in most of the news articles.

And...? No-one is suggesting this kid is some kind of genius. This 14 yo was obviously proud enough of what he did to want to show his teacher. My daughter will be 14 in November so I am quite sensitive to the types of things a kid this age might be proud of. The details of how easy you think his project was have no bearing of the topic of this thread.

Go pick on someone your own age! ;)
 
Not bent out of shape; once I saw the object I became highly skeptical that it was built from "scratch", or homemade in any classical sense, as has been claimed by the student and repeated in most of the news articles.

Again, I don't know the actual source of these materials, but at minimum the integrated circuits that drive the clock and the display are always pre-fabricated units, whether for retail clocks or for kits. The kits I've seen involve wiring them together (often using a pre-printed and partially assembled circuit board using cables, etc). In looking at the photos of the boy's clock I have no reason to not assume this came from a kit, or perhaps represented separately obtained chips, display, etc. wired together. But of course I can not be certain that these did not came from the guts of a pre-assembled clock, although the size and shape of the items and length of the cables makes this seem less likely than a kit or self-assembled.

Even if originally together in a retail clock, the mounting of the display etc, looks pretty good for a 14 year old (based on my own experiences and own kids). Is he an electronic genius? Probably not. Did he design his own integrated chip-timer circuit and print it using micro lithography? Certainly not. Is he a 14 year old geek interested in electronics and not a bomb maker- definitely.

I am sorry if this 14 year old may not have lived up to your technical expectations or hopes (hard to know exactly where he started), but no matter what, I appreciate his spirit and interests.
 
Last edited:

ISF - Join now!

Every member here is approved by hand. No bots, no spam, just people who care about evidence and honest debate.

Membership is free!

Create your free account

Back
Top Bottom