Bigfoot - The Patterson-Gimlin Film

Status
Not open for further replies.
A bit more along the lines of what rgann just stated. Not that it was cold that day or anything, there just seems to be quite a few variables when it comes to the camera.

"That being said, there is one aspect generally overlooked when an attempt is made to evaluate the authenticity of the Patterson-Gimlin film — the weather. What does the weather have to do with it, you ask? In fact, temperature plays a major role. Motion picture film cameras are notoriously sensitive to weather, and temperature in particular — especially older, lower-end cameras, such as Roger Patterson would have had access to. Professional camera crews go to great pains in order to protect their cameras from the elements, as can clearly be seen in any "behind-the-scenes" footage or photos you see of outdoor film shoots, because temperate affects film speed. In college, I once had an entire can of film rendered useless because my crew and I weren't experienced enough to know this. The colder the area in which you are shooting is, the slower your camera will operate, and as a result, the film will move through the gate at a slower speed, no matter what your FPS setting is. In my example, despite having my camera set at the standard 24 FPS, my camera was actually shooting the action at between 18 and 20 FPS thanks to the outside temperature. As a result, when viewed, my footage looked surreal, and the movement of the characters was odd."

http://www.cryptozoology.com/cryptids/sasquatch.php


m
 
http://www.photocamera.com/pictures/0308/Picture 030.jpg

I just don't see how you can risk reloading this under a poncho if you have just filmed bigfoot on your first roll, and want to use your last roll to film the tracks it just left.

It's not like the K-100 was their only camera. They had, what seems like, unused still cameras, with full rolls on them. What did they do with the K-100, anyway? They didn't even show the trackway, for pete's sake, correct? Just some single, or couple of prints, some plaster pouring and much mugging for the camera? Just spitballing here, but exactly what was captured that they couldn't do, and arguably, do better, with still shots? If it had to be done that same day, at all?

Unless, of course, it was all for a movie.
 
rgann,

Sorry I missed that last question. I'm fairly certain that it's a spool and you would replace your take-up spool with the one you just used, and then thread the new spool. I think you could safely get away with swapping out under a jacket or poncho (just find a shady spot) without to much damage to the film as long as the spool had sides on it. You may lose some frames at the end but that would depend on whether the motor pulled the film all the way though or stopped prior to the tape/very end. The tail end may have to be manually pulled through on that model but you would just put it in neutral and wind it through, I think. If it stopped prior then there would be a frame that's called the last-frame-overexposure.

LT, I don't think I would personally risk it, even if the possibility of damaging the film were minute. I mean we are talking about bigfoot and pig throwing.



m
 
1967 radio interview.

Now Roger, what took you to that place, and precisely where was it, and why did you go there?

Roger: Well first of all, the reason that we were in this place was that I'd been filming a documentary on this thing for the past eight months or so and I'd been going to areas interviewing people that have seen these creatures, other than myself now, and we went to this particular area because a month before this they had found three different sets of tracks up in that area.

W: Now come back to yourself, first of all you showed some routine film of your packhorses, didn't you?

R: Right.

W: Now what were you doing filming at that particular time on the pack horse trip?

R: Well, we hadn't taken any and I thought right of that particular area there, before, and it was a beautiful area right in there, there was some of the .

W: You were just taking odd shots, then?

R: We were just taking some shots of the scenery and of myself and Bob and .

W: Alright, just jump to what you first saw that made you excited.

R: Well we rounded a bend in the road .
 
Info on cameras and shutters

In film school, in college in the 60's, I did work with 16mm cameras (as a cameraman) and worked quite a bit with 100' daylight loads.

Ideally, you load your camera in a "black bag", a double lined fabric bag with two arm ssleaves to put your hands inside, and a zipper to open and close to put the camera and film in or out. It's perfectly light-tight, so you can change any film reel.

A "daylight reel", as used on the Kodak camera then, is one with phlanges on the reel to shield most of the film from light, so only the outermost layer of film gets exposed to the light. Real bright direct sunlight on the reel can go deeper, especially on the edges. So ideally, even though it's called a "daylight reel" we would usually change reels by covering the camera and reels with a jacket or other thick blanket material, whatever's handy. A poncho would do.

You remove the reel of exposed film, put it in the film can, tape the can shut, then switch the empty feed reel to the takeup position, then open the film can of your new unexposed reel, take out the reel, and put it into the "feed position". Then you thread it through the film gate and takeup loops, and finally thread it onto the takeup reel. Close the camera, run off about 2 seconds of film (the part possibly exposed to enough light to be flared), and you are ready to shoot.

Regards the shutter question, the shutter opens once for each frame exposure (unlike a projector which opens twice per frame projected) but even if the camera is set at 16 fps, the actual shutter speed is less than 50% of the cycle. If, for example, the shutter opening is only 90 degrees of the total shutter rotation (out of 360 degrees), that's one forth of 1/16th second, or 1/64th of a second for the true shutter speed.
 
In 24-frame cinematography (most 16mm cameras) a 180-degree shutter cycle/opening is standard; the correct shutter speed for 24fps would there fore be 1/48th of a second. I don’t think we are talking about an auto shutter ramp (speed-up slow-down film rate) and or cranking the leaves down (change shutter degree). I might add that although 180 degrees is the said commercial standard many of the old 16mm’s had the shutters fixed at 170 or 172.8 degrees (maybe a bit lower on some of the older ones), but generally doubling the fps for a shutter speed is tried and true at 180 degrees. Shooting film using a shutter opening from 144 - 200 degrees is very common it just depends on what effect you want. Does someone think that the K-100 had a 90 degree fixed or variable shutter? That would really throw a wench in the crank.

I don’t think Patterson was doing anything fancy with the K-100 I believe it had a Kodak Cine Ektar 25mm fixed at f/1.9 and the fps lock worked the shutter speed. Everything about that film tells me slow and low.

Who knows, it could be bigfoot.


m :bike:
 
Mangler:

The 90 degree shutter comment was simply a hypothetical to show relation of shutter angle to compare fps to shutter speed.

Most of my personal experience was with Arriflex and Eclair NPR cameras, which often had highly variable shutter angles, for more options in controlling exposure and shutter speed.

The comment wasn't intended to imply the Kodak had a 90 degre shutter. I have never worked with that particular camera.
 
No worries Bill I was just mouth-in off, I could see that your numbers were good. I just didn’t want anyone to get all goofy when they saw the fast shutter speed. Actually I have never even associated a variable shutter with that camera, I suppose it could have one, I doubt it, but it’s possible. My guess would be fixed at around 170.


m
 
mangler:
for a fixed shutter camera, 170 to 180 souns about right, and LTC confirmed that.

I sometimes forget that some of the features on the Arriflex and Eclair aren't on consumer cameras, like the Kodak.

Bill
 
Info on cameras and shutters

In film school, in college in the 60's, I did work with 16mm cameras (as a cameraman) and worked quite a bit with 100' daylight loads.

Ideally, you load your camera in a "black bag", a double lined fabric bag with two arm ssleaves to put your hands inside, and a zipper to open and close to put the camera and film in or out. It's perfectly light-tight, so you can change any film reel.

A "daylight reel", as used on the Kodak camera then, is one with phlanges on the reel to shield most of the film from light, so only the outermost layer of film gets exposed to the light. Real bright direct sunlight on the reel can go deeper, especially on the edges. So ideally, even though it's called a "daylight reel" we would usually change reels by covering the camera and reels with a jacket or other thick blanket material, whatever's handy. A poncho would do.

You remove the reel of exposed film, put it in the film can, tape the can shut, then switch the empty feed reel to the takeup position, then open the film can of your new unexposed reel, take out the reel, and put it into the "feed position". Then you thread it through the film gate and takeup loops, and finally thread it onto the takeup reel. Close the camera, run off about 2 seconds of film (the part possibly exposed to enough light to be flared), and you are ready to shoot.

Regards the shutter question, the shutter opens once for each frame exposure (unlike a projector which opens twice per frame projected) but even if the camera is set at 16 fps, the actual shutter speed is less than 50% of the cycle. If, for example, the shutter opening is only 90 degrees of the total shutter rotation (out of 360 degrees), that's one forth of 1/16th second, or 1/64th of a second for the true shutter speed.

Have you figured out resolution yet? Seems your class was short.

I really want to know how you can spot the features you claim to see.
 
I should have the manuals for the K-100 and the K-100 Turret in a few days. Hopefully these will answer several questions.[/QUOT

off topic

If you want to talk about cameras start another thread.
 
Wasn't the Patterson-Gimlin Film filmed with a "camera?" It seems as on topic as whether someone's educational progress.

Does anyone know of any videos on the web that show the walk at different FPS? I've seen folks say a number of times that it makes a profound difference in whether it looks like a guy in a suit or not. While I have no doubt of this, I would like to see this for myself.

Thx.
 
I should have the manuals for the K-100 and the K-100 Turret in a few days. Hopefully these will answer several questions.[/QUOT

off topic

If you want to talk about cameras start another thread.
Are you joking? I don't see a smiley there, but considering how often questions have arisen about how the camera performed or should have performed, what its capabilities were, even how it ought to have been loaded, it seems reasonable for someone to come up with something more than extrapolation from ebay sales and camera collecting pages.
 
2. Maybe Roger Patterson scrapped together some fur and made himself a Sasquatch suit stuffed Bob Heronimous into it and cranked out a
real hum dinger of a Sasquatch film that made his home made Biggie look super. You know smile baby the camera loves you. Yeah the camera loved that suit. Odds are way against it.

HMMM...How did you calculate the odds? Is this based on a belief/gut feel or some calculation you arrived at? This statement indicates you are somewhat convinced that the first option, a real life creature, which nobody has ever been able to record or find evidence of since the film was recorded. This is a pretty bold claim with nothing, other than this forty-year old film, to back it up. Seems to me it is the filming of an actual creature which has the "Odds way against it".
 
Status
Not open for further replies.

ISF - Join now!

Every member here is approved by hand. No bots, no spam, just people who care about evidence and honest debate.

Membership is free!

Create your free account

Back
Top Bottom