PS Audio Noise Harvester

Paulhoff said:
First you hear what you want to hear, any time I have double blinded my audio friend in testing he has always failed.

Satellites are not grounded, and we have no problem with that, daaaaaa.

Your equipment is already shielded, it is called metal.

And no, NASA does not use Carbon Fiber as a better shield then metal.

Paul

:) :) :)
Click to expand...

http://www.grc.nasa.gov/WWW/epbranch/other/grfabs.htm
Composites using vapor-grown carbon fibers (VGCF), the most conductive of the carbon fiber types, are attractive for applications where low density, high strength, and at least moderate conductivity are required, such as electromagnetic interference shielding covers for spacecraft.
Click to expand...
 
ExtremeSkeptic said:
The same thing will be proven about cables too, I gave away a speaker cable for free and it turned a heavy skeptic into a believer.
Click to expand...
I can make cables do anything I what, I can change the sound without a problem, that is no big deal, cable people do it all the time, the words are inductance and capacitance. That is all they have to do is add one or both and it will change the sound, but the bottom line is “IT WILL CHANGE THE SOUND”. If you think it sounds better, so be it, but you think is sounds better for the wrong reasons.

Paul

:) :) :)
 
Paulhoff said:
You say you don't listen to music, so how would you know. And still it doesn't take away from the fact that you have shown that you know nothing about audio equipment, and everytime I think I know how little you do know you go and write more and show me that it even less than that.

Paul

:) :) :)
Click to expand...
It isn't an accident that everytime I have made you doubt about yourself I took away your doubt in the next post, read this thread from the beginning and see for yourself.

To convert a skeptic you need to do it little at a time. If you suddenly slide away the ground he stands on he will hurt himself.
 
ExtremeSkeptic said:
I don't spend my time memorizing the names of imperfect components. I rather spend it removing the external noise that interferes with them.
Click to expand...
You have no idea that all audio and all equipment that amplifies single that have a bandwidth use stagger-tuned circuits, your equipment uses them and you still don't know what it is......

Paul

:) :) :)
 
Just so you know, I am doing 5 other threads on three different forums right now.....

Paul

:) :) :)
 
ExtremeSkeptic said:
It isn't an accident that everytime I have made you doubt about yourself I took away your doubt in the next post, read this thread from the beginning and see for yourself.

To convert a skeptic you need to do it little at a time. If you suddenly slide away the ground he stands on he will hurt himself.
Click to expand...
You make me doubt myself, mmmm

Myself,

Yes

Does he make you doubt yourself,

Thinks for an nanosecond, way to much time wasted, NO

Paul

:) :) :)

Like NO man
 
Last edited:
Paulhoff said:
I just love we these guys talk about dielectric burn in and or brake in. Puncturing the dielectric would be called a short and serves no function. First it was the copper and or silver wire being broken in with these guys, now it is the dielectric. The dielectric only come into play at high frequencies in the MHz and higher, and it does not cause distortion, it only causes power lost.
Click to expand...



The stronger the dielectric is the more it grabs and weakens the signal when it tries to run through, if you have air dielectric the juice can flow easier because it is running in the wind. Air is easier to puncture than hockey players skating on the surface of the conductor trying to grab you. It will be too exhausting and you will be weaker when you come out from the other end.

There is also the problem with bats (EMI) that try to enter the conductor and you need to dodge them. When putting a Carbon Fiber net around the cable (ERS Paper) the bats get sliced into smaller parts when they fly through, and when they hit your body you don't slow down as much. If you get hit by big bats you will be bleeding by the time you come out from the other end.

So with air dielectric (Nordost Valhalla) the juice flows smoother through the cable, and with shielding (ERS Paper) the juice that comes out from the other end will be cleaner. With stock cable the juice will be brown and I don't like that.
 
Paulhoff said:
You make me doubt myself, mmmm

Myself,

Yes

Does he make you doubt yourself,

Thinks for an nanosecond, way to much time wasted, NO

Paul

:) :) :)

Like NO man
Click to expand...
It is easy to become a skeptic, all you need to do is not to believe. Nothing else is needed.

Paulhoff said:
Just so you know, I am doing 5 other threads on three different forums right now.....

Paul

:) :) :)
Click to expand...
Why waste time with truth if you can spend the time trolling in forums? :rolleyes:
 
ExtremeSkeptic said:
The stronger the dielectric is the more it grabs and weakens the signal when it tries to run through, if you have air dielectric the juice can flow easier because it is running in the wind.
Click to expand...

That is so bogus, that is not how a dielectric works, grabs the signal, you're clueless.

OK how fast do electrons flow thru a wire.......

Paul

:) :) :)
 
ExtremeSkeptic said:
It is easy to become a skeptic, all you need to do is not to believe. Nothing else is needed.

Why waste time with truth if you can spend the time trolling in forums? :rolleyes:
Click to expand...
Wrong, wrong and like everything else you write here, wrong.

A good skeptic knows the right questions to ask.

Paul

:) :) :)
 
Last edited:
ExtremeSkeptic said:
There is also the problem with bats (EMI) that try to enter the conductor and you need to dodge them. When putting a Carbon Fiber net around the cable (ERS Paper) the bats get sliced into smaller parts when they fly through, and when they hit your body you don't slow down as much. If you get hit by big bats you will be bleeding by the time you come out from the other end.
Click to expand...
bat_country.jpg


That was too easy.
 
Paulhoff said:
That is so bogus, that is not how a dielectric works, grabs the signal, you're clueless.

OK how fast do electrons flow thru a wire.......

Paul

:) :) :)
Click to expand...
Electrons don't flow, they are just the ground where the signal runs on.
You really need to learn basic physics. http://amasci.com/miscon/eleca.html#poynt

Paulhoff said:
Wrong, wrong and like everything else you write here, wrong.
Click to expand...
The one who is wrong is the one who thinks he is right.

Paulhoff said:
A good skeptic knows the right questions to ask.

Paul

:) :) :)
Click to expand...

That's the problem, he "knows" they are the right questions.
 
First off, I didn't have to look it up like you did and second they do flow, and from the site you posted.

Electrons don't flow fast like the energy does, instead they ooze along slowly to produce an electric current.
Click to expand...

If they didn't move at all, they wouldn't make a magnetic field and the cone in a speaker wouldn’t move, daaaa.

Paul

:) :) :)

dielectric grabs the signal, daaaaa
 
ES is just spouting BS. If he has a testable claim let him state it and be tested.
 
Paulhoff said:
First off, I didn't have to look it up like you did and second they do flow, and from the site you posted.



If they didn't move at all, they wouldn't make a magnetic field and the cone in a speaker wouldn’t move, daaaa.

Paul

:) :) :)

dielectric grabs the signal, daaaaa
Click to expand...
You were cherry picking.

Electrons don't flow fast like the energy does, instead they ooze along slowly to produce an electric current. But how can electrons flow slowly if the energy flows fast? It's because the energy can leap from electron to electron. Indeed, the energy is connected to a whole vast population of electrons in the wire, and it isn't attached to any single one.
Click to expand...



You know AC (Alternating Current)? It isn't a constant motion. You need to learn basic English: http://dictionary.reference.com/browse/flow

It is impossible for something to be flowing, everything is vibrating. You need to learn how the Universe works. http://www.internationalskeptics.com/forums/showpost.php?p=2381577&postcount=16
 
Last edited:
Paulhoff said:
dielectric grabs the signal, daaaaa
Click to expand...
Yes, most of the signal travels outside of the conductor in the dielectric. It is simple logic which skeptics don't have because they have been brainwashed by the schools that teach flawed knowledge.

Anyone with experience in audio knows that dielectric makes a big difference. The surface of the conductor also needs to be polished to reduce distortion.
Skeptics think their distorted music sounds good because they haven't heard any better.
 
You must log in or register to reply here.

Back
Top Bottom