9/11: How they Faked the Videos

Can you point to the link which explains how the laterally bent steel is consistent with a head on impact of a jet wing, please?
You mean these?

image-4.png


That wasn't a head on collision. I am surprised that you keep on getting the towers mixed up.
 
No citation needed. You'll either have to take my word for it or verify it your yourself. Every single one of the "live" broadcasts of the alleged impact of flight 175 were from the perspective of the hole in the north tower. The North Face of the North Tower was opposite the South Face of the South Tower. The South Face of the South Tower was not broadcast on live television. It was broadcast later, after the propagandists had time to edit the footage to remove the missiles and add a plane. Explained in the OP, and many times afterwards in the last 2500 comments. Scroll back.

The reason, as already explained, the reason the live coverage was from a limited angle was and because the networks are housed in tall buildings to the north of the WTC. They ran cameras up to the rooftops of their buildings and started filming and or used the live cameras already in place. The face of the south tower was not broadcast live because there was no live feed from that side of the building (still isn't).

It took months to edit and alter video with CGI in 2001.

Smoke is still the hardest CGI effect to pull off even today.
 
Can you point to the link which explains how the laterally bent steel is consistent with a head on impact of a jet wing, please? Do any of the links discuss the fact that the "jet crashes" were not broadcast live?

Coward.

Your claim that the illnesses from Ground Zero were all fake just got shot down in spectacular fashion and you know it.

Grow up.
 
The reason, as already explained, the reason the live coverage was from a limited angle was and because the networks are housed in tall buildings to the north of the WTC. They ran cameras up to the rooftops of their buildings and started filming and or used the live cameras already in place. The face of the south tower was not broadcast live because there was no live feed from that side of the building (still isn't).

It took months to edit and alter video with CGI in 2001.

Smoke is still the hardest CGI effect to pull off even today.

The explosions and the smoke were real. Not so the CGI planes. Have you read the OP?
 
You mean these?

[qimg]https://robinsrevision.files.wordpress.com/2020/01/image-4.png?w=567[/qimg]

That wasn't a head on collision. I am surprised that you keep on getting the towers mixed up.

Yes, those. You have yet to explain how a jet's wing which was striking from the front (don't say perpendicular for the south tower!) can gouge out three sides of a steel column, but not the aluminum sheeting that covered those three sides. Your desperation is noted!
 
Can you point to the link which explains how the laterally bent steel is consistent with a head on impact of a jet wing, please? Do any of the links discuss the fact that the "jet crashes" were not broadcast live?

Even if the planes hit head on (one did, one didn't) none of the four wings did, because they werel swept back at about 30°+ (like all modern airliners)
 
Nope. And if it was, it would be a cinch to prove me wrong. But it isn't, and you can't.

Sorry, but the onus is on you to provide evidence for your claim. What you provided instead was a "Well, I'm not really saying that I'm the only person saying this, but wait, yes I am." That is ipso facto a self cite. I'm not holding my breath for any physical evidence that nobody saw the planes crash in real time.
 
Yes, those. You have yet to explain how a jet's wing which was striking from the front (don't say perpendicular for the south tower!) can gouge out three sides of a steel column, but not the aluminum sheeting that covered those three sides. Your desperation is noted!

You want me to explain that again???

You have yet to explain why you think that th cladding (which is not directly attached to the steel and does not touch the steel at any point) must necessarily be cut all the way through, and not just most of the way through.

Furthermore you haven't tried to explain why you think that the reason the cladding has a hole in the face and is still attached on the left hand side is because it took a direct hit from a cruise missile on the left.

How did the left hand side of the cladding survive a direct hit from the left by a cruise missile?
 
Yes it did. I see you are unable to explain how how they predicted the wind weeks before 911.

No it didn't. The smoke was no issue for editing the impact videos, which were not broadcast live. They had plenty of time to edit their CGI plane to include "smoke shadows" and reflected light. Besides, as explained a couple thousand posts ago, the damage evidence alone proves all the footage of the "plane" impacts are fraudulent.
 
You want me to explain that again???

You have yet to explain why you think that th cladding (which is not directly attached to the steel and does not touch the steel at any point) must necessarily be cut all the way through, and not just most of the way through.

Furthermore you haven't tried to explain why you think that the reason the cladding has a hole in the face and is still attached on the left hand side is because it took a direct hit from a cruise missile on the left.

How did the left hand side of the cladding survive a direct hit from the left by a cruise missile?

Sure, go for it. I'm working on a 3D animation that will explain it nicely, so yes please. Explain how the steel was cut on three sides, but the aluminum sheeting that covered those three sides, was only cut on two sides, but not on the side on which the mostly hollow aluminum jet wing allegedly impacted.
 
Sorry, but the onus is on you to provide evidence for your claim. What you provided instead was a "Well, I'm not really saying that I'm the only person saying this, but wait, yes I am." That is ipso facto a self cite. I'm not holding my breath for any physical evidence that nobody saw the planes crash in real time.

Annnnnd now we're back to the original claim that a mostly hollow aluminum jet wing cut the steel, to which I say prove it.
 

ISF - Join now!

Every member here is approved by hand. No bots, no spam, just people who care about evidence and honest debate.

Membership is free!

Create your free account

Back
Top Bottom