Split Thread The Towers should not hve collapsed (split from Gravysites)

By placing the thermite on the lateral joints of the structural grid. You're embarassing embarrassing.


Well thats interesting because in an earlier post on this very thread. You pointed out images of supossed "thermite' damage on the sides and broken ends of core columns. You're embarrassing yourself.
 
Well thats interesting because in an earlier post on this very thread. You pointed out images of supossed "thermite' damage on the sides and broken ends of core columns. You're embarrassing yourself.
Because... Um... No, sorry, I can't see it. Obviously lateral joints could not have been connected to sides and broken ends of core columns.

I can only see you on ignore soon.
 
Alright, I think this is the time where I can declare victory over JREF.

Thank you very much for playing.

You've been ... ahem, helpful. At times. Some of you.

Note that since I now proved beyond any doubt to you that thermate was used on 9/11, you can now choose to be 'troofers', or being blinded by religious dogma. Quite a bummer, I am certain.

Edited by Lisa Simpson: 
Edited to remove inappropriate remark.


Do not advocate violence or suicide.
Replying to this modbox in thread will be off topic  Posted By: Lisa Simpson


As for me I'll be waiting for the money to pour in. As 9/11 is now proven to be an inside job, it can just be a matter of minutes until the CIA calls me and offers me money to shut up. Any minute.

Any minute.

ANY MINUTE!
 
Last edited by a moderator:
Last edited:
better check again.. your examples.. your cartoon columns are vertical. busted moving goal posts. you lose.

http://www.internationalskeptics.com/forums/showpost.php?p=3848633&postcount=179
There were enough valid arguments from JREF to reject the HE/Thermate-Compo hypothesis, so your argument is vastly out of date and in fact referring to an entirely different theory.

Also, moving goalposts? You're confusing a model with an illustration. The model did not take lateral joints into account as a means of securing the thermate yet, but did take into account that the beams continue for quite a long time in both directions and *are* going to be lateral secured in both directions. Your argument fails even to counter a failed theory. The real reason against the HE/Thermate-Compo was the sound. Although I can still not entirely rule the HE/Thermate-Compo out, using the lateral joints as a means of attack makes the HE charges superfluous. So while JREF goes with the sound argument, I went by ockham's razor and rejected the model for a more simple one that also satisfied the sound-related JREF objections.
 
Last edited:
To put it short: No, that's not what we're talking about here. We're talking about blackbody radiation due to temperature. I dare you to heat a piece of steel to 200°C and see if it glows yellow.

Oh don't be shy Dab.... I've seen worse insults in my life... :rolleyes:

200 oC is based on visible appearance of the oxide colors. If this were not the case then tempering the steel properly would be very difficult to accomplish

source
Color tempering is based on the oxide colors that appear on the surface of steel, as it is heated. When you slowly heat a piece of polished hardened steel, you can see the surface turn various colors as the temperature changes. These colors indicate structural changes are taking place within the metal. Once the proper color appears, the part is rapidly quenched to prevent further structural change. In color tempering, the surface of the steel must be smooth and free of oil. The part may be heated by a torch, in a furnace, over a hot plate, or by radiation.


Link
Tempering: Once the steel is quenched, it has to be tempered using heat. This is done by first cleaning the piece down to bright metal and then slowly heating it, watching for the color of the metal to change. The proper temper is reached according to the chart below and then the metal is further cooled in water.

It is worth noting that steel is typically tempered at this temperature
 
Last edited:
Oh don't be shy Dab.... I've seen worse insults in my life... :rolleyes:

200 oC is based on visible appearance of the oxide colors. If this were not the case then tempering the steel properly would be very difficult to accomplish

source
Link

It is worth noting that steel is typically tempered at this temperature
That's all correct but entirely besides the point, as it has nothing to do whatsoever with the observed phenomenon. Quit stalling.
 
Dabljuh, it's as if you think arrogance and rhetorical games are going to put these folks in their place. LOL

Anyway, perhaps your next step after your defeat of mighty JREF is to, oh I don't know, maybe take your earth-shattering evidence to the proper authorities. I'm sure they will as well bow to your superior intellect.
 
Did he just advocate our suicide?

Apparently....


Alright, I think this is the time where I can declare victory over JREF.

Anybody care to summarize all of the argument failures, straw men, stundie-worthy claims, ect. he's made so far?

Thank you very much for playing.
No, thank you

In the end, the topic ended up with half of the resident population on ignore
e110574.gif
 
What authorities? The ones that perpetrated this? That sounds like a wise move. No, I'll just wait for my delicious CIA-Hush-Money.
 
What authorities? The ones that perpetrated this? That sounds like a wise move. No, I'll just wait for my delicious CIA-Hush-Money.
But....the authorities killed 3000 Americans. Why do you think they would pay you instead of arranging an accident?
 
In the end, the topic ended up with half of the resident population on ignore [qimg]http://209.85.62.24/32/121/0/e110574//e110574.gif[/qimg]
And with good reason. Half the resident population seem to be worthless spammers and hivemind. By the way, you didn't get ignored[edit for clarification]. I think you can pat yourself on the back for that. It's like my personal badge of "I don't think you are completely retarded"
 
Last edited:
And with good reason. Half the resident population seem to be worthless spammers and hivemind. By the way, you didn't get ignored until the end. I think you can pat yourself on the back for that. It's like my personal badge of "I don't think you are completely retarded"


Yet you quoted the very last line of his very last post?

oh i get it.. your definition of putting someone on ignore is not by the forum software. but by putting your hands over your ears and saying 'lalalalalnananana I'm not listening to you...... nanananana... i can't heeere youuuu"
 
By the way, you didn't get ignored until the end. I think you can pat yourself on the back for that. It's like my personal badge of "I don't think you are completely retarded"

I hope you understand if the posters here don't take that as a compliment.

What was your purpose in joining this site and interacting with us? It seems a bit bizarre to join and right away begin insulting other members if you intend to gain something other than personal satisfaction from the interaction. I'd appreciate any insight you can offer into your motives.
 

Back
Top Bottom